Windows 7 USB Drive not shown/loaded after plugged in.

cybercore

New Member

Joined

Jul 7, 2009

Messages

15,641

• Jan 17, 2011

• #2

When you plug the drive in, can you see it in windows disk management?

 

Upvote 0 Downvote

Basher

Honorable Member

Joined

Mar 15, 2009

Messages

357

• Jan 17, 2011

• Thread Author
• #3

No - not on the other pc :-(
The light is on but there is no one at home

 

Upvote 0 Downvote

Trouble

Noob Whisperer

Joined

Nov 30, 2009

Messages

13,722

• Jan 17, 2011

• #4

Hey Basher;
Does the drive have an external power source or does rely totally on a single USB connection for data and power? If so try to make sure you plug it into an actual MoBo USB port, rather that say one that has been piped out on a front header cable, or one that is part of a Hub.
Also you might try booting the PC with the drive connected and see if that makes a difference.

 

Upvote 0 Downvote

Basher

Honorable Member

Joined

Mar 15, 2009

Messages

357

• Jan 17, 2011

• Thread Author
• #5

Cheers - I think the drive is "fork and kniffed" My PC is starting to have problems with it - o well, such is life

And thanks for the very quick and prompt replys

Basher

 

Upvote 0 Downvote

Trouble

Noob Whisperer

Joined

Nov 30, 2009

Messages

13,722

• Jan 17, 2011

• #6

Great little devices when they work. Extremely disappointing when they let you down. Have you been able to determine if the problem is the actual drive mechanics or is it just the enclosure crossover electronics? In which case you might be able to use the actual drive elsewhere, unless of courses it's clicking and banging.

 

Upvote 0 Downvote

Basher

Honorable Member

Joined

Mar 15, 2009

Messages

357

• Jan 17, 2011

• Thread Author
• #7

Hi Randy

The drive is quite enough - was going to take it out and give it a test with a hdu connector thingy if it works ok in that just need to get another case for it.

 

Upvote 0 Downvote

J

Joe S

Excellent Member

Joined

Jan 12, 2009

Messages

3,793

• Jan 17, 2011

• #8

WD makes a power booster cable for their USB powered drives. It uses 2 USB ports I guess there are generic versions too.
Joe

 

Upvote 0 Downvote

Basher

Honorable Member

Joined

Mar 15, 2009

Messages

357

• Jan 18, 2011

• Thread Author
• #9

Stripped the unit down and took out the drive and connected it via an adaptor I have and the drive was corrupt so I did a full format on it put it all back together and works ok now on my PC

Just waiting for friend to come around to try it on her laptop.

Basher

 

Upvote 0 Downvote

Solution

Trouble

Noob Whisperer

Joined

Nov 30, 2009

Messages

13,722

• Jan 18, 2011

• #10

Thanks for the update Basher. Good to know. Just strange that you couldn't have accomplished something similar when the drive was still in the enclosure. So my suggestion might be, be careful as the electronics part of the enclosure may have been responsible for the corruption and may at some later time cause a similar problem.

 

Upvote 0 Downvote

Basher

Honorable Member

Joined

Mar 15, 2009

Messages

357

• Jan 18, 2011

• Thread Author
• #11

To be honest Randy I only tried a quick format while it was in the case :-S but the good news is that it is now seen by the laptop.

Thanks for all the advice

Basher

 

Upvote 0 Downvote