Windows 10 Windows 8.1/10 sleep problem

T

TheTud69

New Member
Joined
May 29, 2016
Messages
15
Ok, I know this was asked many times, but I tried every solution I could find and after 2 months of searching I decided making my own thread.

PC: ASUS N56JN / R501J (Laptop)


The problem:
  • PC seems to enter sleep normally(takes about 5-7 seconds for the HDD and power LEDs to go off), but waking up doesn't work as expected. Instead of resuming, the PC boots like nothing happened, and all opened app states are lost.
  • All drivers seem to be properly installed
  • Even before installing the drivers my laptop had the same problem
  • I had this problem both on windows 8.1 and on windows 10 clean install(my actual OS)

Solutions I tried:
  • Enabling/Disabling the power saving option in BIOS(next to this feature was written "can prevent computer from waking up properly")
  • Enabling/Disabling Hybrid Sleep in Power Options
  • Looking for problems in the Event Viewer
  • Modifying various settings in Control Panel
Additional info:

Event Viewer Power Errors

Active Power Plan Settings

Power Options:

NOTE: There is no Hibernate option in Power Menu
Actually before installing drivers, there was hibernate but no sleep, now its sleep but not hibernate



I'm not native English, so I'm sorry if there was anything unclear
 
Solution
Sort by date Sort by votes
When the computer wont sleep, open an elevated command prompt and type the following and post the results
powercfg /requests if you have any that do not say None. Then that is what is preventing sleep.
 
Upvote 0 Downvote
Code: 
powercfg /requests
DISPLAY:
None.

SYSTEM:
[SERVICE] \Device\HarddiskVolume4\Windows\System32\svchost.exe (RasMan)
Active RAS connection
[DRIVER] Legacy Kernel Caller

AWAYMODE:
None.

EXECUTION:
None.

PERFBOOST:
None.

This means HDD is the problem?

EDIT: SORRY, MY FAULT, I'm actually running SEATOOLS, and most probably that's the reason it shows that...
 
Upvote 0 Downvote
rasman is for remote access and the legacy kernel caller is probably some misbehaving device and could be part of anything you may need to disable a device and reboot to see if goes away. I would look toward really old or more uncommon devices such as TV tuners or other media type devices.
 
Upvote 0 Downvote

>>>Hi; thanks for giving us back this information and the timeline of your troubleshooting results. It appears to me that at this point in the process you still have 2 things to try, but my initial diagnosis is that your Motherboard has developed a coincidental failure since your initial install of Win8.1. Since the dawn of laptops, I have purchased and repaired literally thousands of laptops; my troubleshooting diagnoses are usually right about 97% of the time or better, as proven out over 3 decades.

Since we don't know what country you are in we don't know the cost of repair, but in the US, a Motherboard replacement at an authorized repair shop or depot runs from $275-$450 or more. Can be up to $1,500 US in certain countries such as Norway. You can certainly pursue further software repairs; but NO SOFTWARE ON THE PLANET CAN FIX BROKEN HARDWARE!! This is one of my "mantras" in the computer repair biz I've developed over the years.

You still have yet to run the W10 clean install from scratch on a new or different hard drive along with the COMPATIBILITY TEST I suggested you run in my POST #23. Without doing these 2 you are still just guessing what piece of hardware (or software) has failed. You yourself have posted that you believe it's a hardware problem. I very much agree with this analysis based on the fact that you've run all available software repairs we typically recommend (CHKDSK and SFC), as well as all possible combinations of power saver settings. The fact that both your hardware diagnostic tests passed; MEMTEST and SEATOOLS, indicates a Mobo failure. The only was to make sure is to replace your hard drive, and then perform a W10 clean install as I have mentioned above in this post and also in POST #23. I'm not sure why you haven't done this yet, as it will provide conclusive proof that your hardware has failed. Perhaps you haven't had the time. I've seen threads continue like this for over a year, and in most cases, the problem never gets resolved because the laptop owner refuses to perform these procedures, or they are too "difficult", or too time consuming, or whatever. Hey, it's your laptop and your problem.

As for what you do next that's up to you. I understand that the store that sold you that laptop with some version of FREEDOS may not be a scam in your country, but it would certainly be here in the US; ASUS does not sell this configuration here and is prohibited by law from doing so. The fact that you have a warranty and haven't yet even contacted ASUS, the manufacturer, tells me you are still not convinced we know what we are talking about, or you don't believe us for some reason. That's too bad for you; as you are no closer to fixing your problem than you were when you made your first post here. At some point, you'll think back to this thread and realize you have few choices: live with problem forever, stop using the laptop and throw it in a drawer, or step up and call ASUS and initiate a warranty repair and get it fixed! This will cost you a little bit of money and you will have to pay $50-$75 US or more to ship them your laptop; however with a free hardware repair paid for by ASUS and return free shipping back to you after the repair is completed, that certainly has to be contemplated in your future at some point.

For your future reference, here's the link to the ASUS contact and global support site with phone numbers for you to call:
ASUSTeK Computer Inc. -Support- Call Us

Best of luck, , let us know how it turns out.
BBJ
 
Upvote 0 Downvote
Solution
could you please show us the advanced power button setting you have enabled on this laptop?
in any event I recommend;
  • press the power icon to open basic settings
  • then press the "chose what power buttions do"
  • disable all the advanced shutdown options



 
Upvote 0 Downvote
Thank you for all the help, and the time you put into this thread. You're perfectly right, I'll just use the warranty.
 
Upvote 0 Downvote
Umm, there already is a screenshot of that in POST #1
I also said the same problem is on Linux, so... It has nothing to do with those options. And when I tried my sleep function I did it from START -> POWER -> SLEEP
 
Upvote 0 Downvote
Hi! Here's my thoughts. I have a Toshiba lap top, going on 5 years old. I have it set to never sleep. It's either on or off. To me the sleep feature is just a gimmick and totally worthless IMHO. If that's the only problem I was having, I wouldn't risk having it sent off some where and coming back with more problems then you have now. Those are my thoughts.
 
Upvote 0 Downvote
Your 1st post does not show us the advanced power “startup” options;

The fact that Linux has an issue does not mean the cause isn’t a windows software glitch and the option to sleep from the start-power menu is controlled from the advanced shutdown settings that I posted in my second image… (temporary) disabling them as I suggest will clear any bad data currently stored in that setting which is often enough to resolve errors caused by Windows software.

I see you have decided to go with your warrantee which is solid advice from BIGBEARJEDI so good luck with that.
 
Upvote 0 Downvote
I agree as well as long as there is a guaranty why deal with this....good luck and please come back and tell us what you learn.
 
Upvote 0 Downvote
Warranty probably wont cover this. The rasman process is software that is preventing sleep and the device is probably not compatible with Windows 10 so again it comes down to software which warranties don't cover.
 
Upvote 0 Downvote
You must log in or register to reply here.