Hi,
W10 CU v1703 can be tricky to install. Suggest you use the
UPGRADE ASSISTANT provided in W10 CU when you attempt to download it. This has worked on 2/3 of my machines so far. One of them required a
CLEAN INSTALL using the Microsoft MCT tool, available here:
Download Windows 10
It sounds like your Windows Update (WU) applet is broken if you don't get the
UPGRADE ASSISTANT coming in. Check your WU settings! Additionally, you may not receive the CU (which can be 3 separate KB's; none of which you have listed so it appears you are not getting it) unless you have
WUDO also enabled (
Windows
Update
Delivery
Optimization). You
MUST have both
WU &
WUDO turned on and running
BEFORE you attempt to check for windows updates.
Other common reasons why the CU fails, are these in order:
1.) Virus/malware that specifically attacks and disables the WU & WUDO applets; try using your MBAM and scan/remove all spyware viruses found.
2.) Windows system registry corruption; attempt to run
chkdsk c: /f and then
sfc /scannow; this may take several hours and multiple passes and run overnight to fix things.
3.) Failed hardware. Both your RAM sticks and your Hard Drive or SSD can produce symptoms that look like software failure, including inability to get W10 updates like you have. You need to test the hardware yourself or pay a licensed Tech to do it for you. should you decide to DIY, take a look at my free and excellent
TROUBLESHOOTING GUIDE here to give you step-by-step instructions:
Windows 10 - Unclickable Task Bar
It's critical that you do this last item #3, as if you don't and you have failed hardware your software won't repair it.
No software on the Planet can repair broken Hardware!!
Any errors returned on the Memory or Hard Drive diagnostics mean you have failed components and they must be replaced.
This should take care of most update problems and get you going.
Post back if you get stuck or have questions along the way.
Best of luck to you,
<<<BIGBEARJEDI>>>