Before changing ports or drivers
Allow about 15 minutes for the initial checks; downloading software and restarting may take longer. Prepare the following:
Quick walkthrough
- The printer’s exact model number.
- A sheet of plain paper and a simple document for comparison.
- For a network printer, its current IP address or hostname, obtained from its control panel or a printed network/settings report. The report’s menu name depends on the model.
- Administrator access if you need to change ports or install software. Canon’s port configuration instructions explicitly require administrator privileges.
Make one change at a time and record the original setting before applying it. For a work printer, use the checks below to gather evidence, but ask IT before changing a shared queue or bypassing the organization’s print server.
Windows 11 compatibility check: On Windows 11 version 24H2 and later, check whether Windows protected print mode is enabled under Settings > Bluetooth & devices > Printers & scanners. Microsoft says third-party printer drivers cannot be used while this mode is active. Do not turn off that security feature merely to try a driver-based speed fix; use the compatible Windows printing setup or consult IT.
1. Print a Windows test page and record the delay
Use Printer properties, not Printing preferences: the Windows test-page button is in the properties dialog.
Windows 11
- Open Start > Settings > Bluetooth & devices > Printers & scanners.
- Select the affected printer.
- Select Printer properties.
- On the General tab, select Print Test Page.
Windows 10
- Open Start > Settings > Devices > Printers & scanners.
- Select the affected printer, then Manage.
- Select Printer properties.
- On the General tab, select Print Test Page.
For your comparison, record:
- How long it takes before the printer responds.
- Whether it starts promptly but pauses while printing.
- Whether the page finishes correctly.
- Whether a second test, with the printer already awake, behaves differently.
Next, print your simple document. Treat the results as diagnostic clues rather than proof of a particular fault:
- The test page is also slow: continue with the connection, port and driver checks.
- The test page is prompt but one document is slow: investigate that document or application first.
- Only large, image-heavy files are slow: Microsoft identifies document complexity and high-resolution images as possible causes.
- The test page does not print: resolve connectivity or driver problems before measuring speed.
Do not keep submitting test pages while earlier attempts remain unresolved. Use one test at a time so the comparison remains useful.
2. Check the connection before changing the port
Start with the physical or wireless connection:
- For USB, check that the cable is securely connected to both devices.
- For Wi-Fi, confirm that the printer’s wireless connection is enabled and that the PC and printer are on the appropriate network. Microsoft specifically warns about separate networks created by access points, extenders or multiple routers.
- Run the printer’s own wireless connection test if its manual provides one.
- If necessary, turn the printer off, unplug it for 30 seconds, reconnect it and turn it on. Allow it to become ready before retesting.
For a Wi-Fi printer, Microsoft recommends a temporary USB or Ethernet comparison, where the printer supports that connection. Follow the model’s connection instructions, then send the same test document through the wired setup. A substantial improvement is evidence to investigate the wireless path rather than assuming the driver is responsible.
Record which printer entry you selected for each test. Your comparison is only useful if you know which connection you actually tested.
3. Inspect the selected port
Open Printer properties using the Windows 10 or Windows 11 path above, then select Ports. Locate the checked entry and record its name and description before changing anything. Ricoh’s troubleshooting instructions use this tab to identify WSD connections; Dell uses it to verify the destination of a network printer.
Do not select ports at random. For a USB-connected printer, use the USB connection identified during installation rather than substituting a network, parallel or serial port. Microsoft’s manual installation procedure distinguishes these connection types. If the correct USB connection is unclear, use the printer’s installation procedure instead of guessing.
Check an existing Standard TCP/IP port
Before editing: Record the current address and selected port. On a managed or shared printer, ask the administrator to make the change.
- Obtain a fresh network/settings report from the printer.
- In Printer properties > Ports, select the checked Standard TCP/IP Port entry.
- Select Configure Port.
- Compare Printer Name or IP Address with the report. Compare the configured hostname or address—not just the port’s display name.
- If an IP address is configured and it is wrong, replace it with the printer’s verified current address.
- Select OK, close the properties dialog and print another Windows test page. Dell documents this address-comparison procedure for Windows 10 and Windows 11.
If the change makes matters worse, reopen the same dialog and restore the recorded address. Do not change protocol, port-number or status-monitoring settings as part of this address check.
If the address repeatedly changes, ask the router administrator about reserving a consistent address for the printer. Dell recommends this approach; the router-specific procedure is outside this Windows port check.
Treat WSD as a clue, not an automatic fault
Ricoh documents slow communication in some of its printer setups using a WSD Port or the RICOH Class Driver, and recommends testing its model-specific driver and a Standard TCP/IP port. That is vendor-specific guidance—not evidence that every WSD connection or Microsoft class driver is unsuitable.
Consider a Standard TCP/IP test only when your printer manufacturer supports it for the model, the printer is directly accessible on the network, and you have its verified address. Skip this change for protected-print configurations or organization-managed queues unless their administrator approves it.
Before adding a port: Keep the original port and record which entry was checked. Do not delete it; retaining it provides a straightforward rollback.
- Open Printer properties > Ports.
- Select Add Port.
- Select Standard TCP/IP Port, then New Port.
- Select Next in the wizard.
- Enter the printer’s verified IP address or supported hostname, then select Next.
- Complete detection and select Finish, then close the port-creation window.
- Confirm that the intended new port is selected for this printer and apply the change.
Canon documents this wizard for supported network printers. If it requests additional port information, consult your model’s instructions; do not copy another model’s device type, RAW/LPR settings or queue name. If the test fails, reselect the original port and apply that setting. (oip.manual.canon)
4. Identify the driver, then check Windows Update
In Printer properties > Advanced, record the name shown beside Driver. This identifies the driver assigned to the queue you are testing. Do not select a different driver from the list simply because its name looks similar to your printer.
Before updating: Save your work and record the current driver and port. If this is a business-managed printer, use your organization’s approved update process.
Microsoft recommends Windows Update as the first driver-update method. Optional driver updates require manual selection.
Windows 11
- Open Settings > Windows Update > Advanced options.
- Under Additional options, select Optional updates.
- If a relevant printer driver is offered, select it.
- Select Download and install.
- Restart Windows after installation, then repeat the test page.
Windows 10
- Open Settings > Update & Security > Windows Update.
- Select Check for updates.
- If View optional updates appears, open it.
- Select the relevant printer driver, then Download and install.
- Restart Windows and repeat the test page. Microsoft’s driver-update instructions recommend restarting after installation even when an update does not explicitly require it.
If no suitable update appears, move to the manufacturer’s support site rather than installing unrelated optional drivers.
5. Download the correct manufacturer driver
Use this route when Windows Update has no suitable driver or the printer manufacturer recommends a specific package.
- Open Settings > System > About and check System type.
- Visit the printer manufacturer’s official support site.
- Search for the exact model number.
- Open its driver downloads and select your Windows version and architecture where requested.
- Download the supported printer package.
- Run it and follow its connection and installation prompts.
- Restart if requested, then test the intended printer entry again.
ARM-based Windows PCs need particular care. Microsoft acknowledges that some manufacturer installers cannot add printers on ARM PCs. Unless the manufacturer supplies specific ARM instructions, Microsoft recommends Settings > Bluetooth & devices > Printers & scanners > Add device instead. Do not assume an x64 printer-driver installer is appropriate simply because other desktop applications run on the PC.
Avoid third-party driver-download sites. Microsoft advises obtaining drivers from the manufacturer’s official site when using a manual download.
6. Verify the improvement before making another change
Use this comparison checklist after each port or driver change:
- Print one Windows test page.
- Record the delay before printing begins.
- Print the same simple document used at the start.
- Confirm that the intended physical printer produced both jobs.
- Check that the output is complete and correctly formatted.
- Only then test the document that originally exposed the slowdown.
A successful repair should improve your repeatable test without introducing failed jobs or incorrect output. If only the original document remains slow, shift the investigation toward that file or application: Microsoft recommends testing application-specific failures separately and identifies complex, high-resolution documents as a possible source of delays.
When a port or driver change does not help
Configure Port is unavailable
Do not force the change through registry edits. Ricoh advises using an administrator account or consulting the company administrator when Configure Port is unavailable. Also confirm that you are inspecting a port type that supports the procedure; Canon’s documentation distinguishes WSD from configurable RAW/LPR ports.
A new driver makes printing worse
If Windows retained a previous device driver, try its rollback option:
- Right-click Start and select Device Manager.
- Expand the relevant printer category and locate the device.
- Right-click it and select Properties.
- Open Driver and select Roll Back Driver, if available.
- Choose a reason, confirm with Yes, and restart if prompted.
Administrator permissions are required. If rollback is unavailable, obtain recovery instructions and the previously supported package from the printer manufacturer or IT rather than deleting driver packages indiscriminately.
Jobs stop progressing rather than merely printing slowly
Restarting the Print Spooler is a separate check for a stalled Windows printing service. Do this when nobody is relying on an active print job on the PC:
- Press Windows + R.
- Enter
services.mscand press Enter. - Find Print Spooler.
- Right-click it and select Restart.
- Retry one test page.
Microsoft documents this service restart for printing problems. If the service repeatedly fails or the same job stalls again, stop submitting duplicates and escalate with the job and driver details.
The delay remains on both wired and wireless connections
Stop changing ports if the comparisons show no improvement. Give the printer manufacturer or IT administrator your model, Windows version, connection type, selected port, driver name, test-page timings and whether other documents behave differently. Include the result of the wired comparison and any rollback performed. Microsoft provides the Windows 11 printer troubleshooter through Get Help as a further diagnostic route; unresolved model-specific driver problems should go to the manufacturer.