📎 AI Summary:
The WindowsForum thread revolves around OliverV seeking help for recurring BSOD errors on their custom-built PC. Initial analysis identifies a probable cause related to outdated or incorrect drivers, particularly highlighting issues with the BIOS, network, and temperature monitoring drivers. After updating drivers with community assistance, OliverV successfully resolves the issue but experiences a new BSOD later, prompting further troubleshooting and continued support from the forum. The overall sentiment is positive and collaborative, with the user grateful for the help and the community actively assisting in troubleshooting.
O

OliverV

Active Member
Member details
Joined
Sep 5, 2014
Messages
14
Thread Author #1
Hello!
I just build this computer and it has been working like a charm.

4670k intel
500 ssd
780 asus direct cu2
16 RAM
650 psu
I recently got a BSOD and was wondering if someone could tell me what is was caused from. I am pretty computer savvy but I don't know how to read a BSOD file.

Much appreciated!
 

Attachments

Solution
kemical
Code: 
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800cd40a10, fffff80000b9c3d8, fffffa80118adb10}

Probably caused by : pci.sys

Followup: MachineOwner
Hi,
The above Bugcheck means that a device driver didn't complete it's job. This could be down to either old or incorrect driver/Bios and looking through the...
Sort by date Sort by votes
kemical

kemical

Essential Member
Member details
Joined
Aug 28, 2007
Messages
36,163
#21
Code: 
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41793, fffff68000037ff8, 200, 1ff}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+1ed59 )

Followup: MachineOwner
---------
Hi Oliver,
Bugcheck 1A means a memory management issue occurred and can mean you have some faulty RAM. I noticed the crash occurred whilst Chrome was in use so please make sure the browser is updated.
Windows does have a memory testing app but it can miss errors and the best app for the job is Memtest86.
If you open the link below you'll see you can run Memtest86 in two ways. You can either burn it to disk or install it onto a USB drive it's entirely up to you. You'll then need to enter the bios to change the boot order so you can boot from either the Disk or USB stick you have Memtest86 on.
You must test for at least 12 hours unless it becomes obvious there is a problem straight away (you'll see errors outlined in red.
Memtest86+ - Advanced Memory Diagnostic Tool
Post any new dump files.
 

Upvote 0 Downvote
O

OliverV

Active Member
Member details
Joined
Sep 5, 2014
Messages
14
Thread Author #22
Thanks for your quick response!! Chrome needed an update, can't believe I didn't think of that. Hopefully that was the issue. If not I will definitely be running Memtest86
Hope you have a great holiday!
<l🙂
 
Upvote 0 Downvote
O

OliverV

Active Member
Member details
Joined
Sep 5, 2014
Messages
14
Thread Author #24
I don't me to bother you again but I did the memtest86+ and came back with a bunch of errors, so I am assuming some of my RAM is bad, only thing is that all 16G show up fine. I got about 3 BSOD just today. I just recently received another BSOD that said it was a "kernel Security check failure"
What I am wondering is if this is just a RAM issue or is there anything else I can do to resolve the problem.
attached is the minidump file
 

Attachments

Upvote 0 Downvote
O

OliverV

Active Member
Member details
Joined
Sep 5, 2014
Messages
14
Thread Author #25
Just an update for those in the future.....using memtest86+ I tested each RAM stick one at a time until I found the stick that was displaying errors.
I have Gskill 2133Mz and they have a lifetime warranty.....hopefully they will honor that.
Anyway would REALLY recommend the memtest86+ software to address RAM issues. I used the in house Microsoft memory test and it didn't even report one error. Hopefully it will be as easy as getting some new RAM in to address this whole issue.
Thanks again to the best admin on this website kemical! 🙂
 
Upvote 0 Downvote
kemical

kemical

Essential Member
Member details
Joined
Aug 28, 2007
Messages
36,163
#26
Code: 
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {5003, fffff58010804000, c5f, c61000183e}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+1e46a )

Followup: MachineOwner
---------
Hi Oliver,
as you can see it's the same bugcheck which just backs up what Memtest86 discovered. I hope all goes well with the new RAM and if anything should crop up again just post back. (sorry i didn't reply sooner I was out last night..).
 

Upvote 0 Downvote
You must log in or register to reply here.