Fable is scheduled to launch on February 23, 2027, with Premium Edition early access beginning February 18, 2027. Because these are pre-release specifications, they remain planning guidance rather than a guarantee that the shipping game, its optimization, or its targets will remain unchanged.
The baseline is 1080p at 30 FPS
The official minimum specification calls for Windows 10 version 22H2, an AMD Ryzen 5 2600 or Intel Core i7-6850K, 12 GB of system memory, and a graphics card with 6 GB of video memory. The listed GPU options are:
- Nvidia GeForce RTX 5050
- Nvidia GeForce RTX 2060
- AMD Radeon RX 6600
- Intel Arc A580
An SSD is required.
An independently reported four-tier performance chart describes the Low tier as a published target of 1080p at 30 FPS. That is the proper context for the minimum specification. It is not a promise of 60 FPS, high settings, or a direct path to a higher-resolution display. It is the stated entry point for running the game at Full HD with Low settings and a 30 FPS target.
The minimum tier also matters because it is distinct from the 16 GB RAM and 8 GB VRAM figures in the recommended tier. Those larger capacities are not the published baseline. A PC with 12 GB RAM, one of the listed 6 GB GPUs, the required Ryzen 5 2600 or Core i7-6850K processor floor, Windows 10 version 22H2, and SSD storage may meet the published minimum requirement.
Meeting a requirement should not be confused with a detailed performance guarantee. The available material does not provide scene-by-scene frame-time data, driver requirements, or benchmark methodology. Performance may differ across game areas, graphics settings, Windows configurations, and the eventual release build.
Recommended hardware presents a choice of targets
For the official recommended tier, Fable lists an AMD Ryzen 5 5600 or Intel Core i5-11600KF, 16 GB RAM, 8 GB VRAM, and one of these GPUs:
- Nvidia GeForce RTX 5060
- Nvidia GeForce RTX 3060 Ti
- AMD Radeon RX 9060 XT
- AMD Radeon RX 6700 XT
The independently reported chart associates this class of hardware with either Medium settings at 1440p and 30 FPS or Medium settings at 1200p and 60 FPS.
That pairing is more useful than interpreting “recommended” as a generic assurance of 1440p/60 play. The reported targets show a trade-off: the same broad tier is positioned for a higher pixel count at 30 FPS or a lower resolution target at 60 FPS. Players who prioritize smoother camera movement and a 60 FPS presentation should compare their system with the reported Medium 1200p/60 target, rather than assume the recommended specification carries a 1440p/60 commitment.
The reference to 1200p should be retained as published. The available official FAQ material does not call it an error or say that it means 1080p. It is less familiar than 1080p, 1440p, and 4K, but there is no basis in the available information to silently substitute a different resolution.
For an actionable hardware comparison, the recommended tier is the published reference for Medium 1440p/30 or Medium 1200p/60—not for High settings at 1440p/60. Buyers weighing an upgrade should first decide which of those targets matches their display and frame-rate preference, then compare CPU, RAM, GPU, and VRAM against that specific tier.
The reported High tier raises the 1440p goal
Details reported by an independent outlet place the High tier at 1440p and 60 FPS. That tier lists an AMD Ryzen 7 7700X or Intel Core i7-12700K, 16 GB RAM, 12 GB VRAM, and these graphics options:
- Nvidia GeForce RTX 5070
- Nvidia GeForce RTX 3080 Ti
- AMD Radeon RX 9070
- AMD Radeon RX 7900 XT
This is the reported tier that explicitly joins a 1440p target with 60 FPS. It also increases the listed graphics-memory requirement from 8 GB at the official recommended tier to 12 GB. In practical terms, readers targeting High 1440p/60 should compare their hardware against this reported 12 GB-VRAM class, rather than treating the 8 GB recommended tier as the relevant published comparison.
There are important limits to that conclusion. The tier list is not a benchmark showing that every listed GPU produces identical performance, nor does it establish a component ranking across all cards. CPU performance, drivers, Windows settings, game options, and the final build can all affect results. The accessible official FAQ directly confirms the minimum and recommended component lists, while the High-tier details are reported from the chart by an independent outlet.
The reported Ultra tier is aimed at 4K/60
The same independently reported chart puts the Ultra tier at 4K and 60 FPS. It specifies an AMD Ryzen 9 7900X or Intel Core i9-13900K, 16 GB RAM, 16 GB VRAM, and either of these GPUs:
- Nvidia GeForce RTX 5080
- Nvidia GeForce RTX 4080
Two points stand out in the reported chart details. First, the listed graphics-memory figure rises again, from 12 GB at High to 16 GB at Ultra. Second, no AMD GPU appears in this particular reported 4K/60 tier.
That omission should not be read as evidence that AMD hardware cannot run Fable at 4K or that no AMD GPU could reach similar performance. It establishes only the contents of the reported tier, not a complete comparison of the GPU market. Still, the published guidance does give 4K display owners a clear caution: neither the minimum specification nor the official recommended component list is presented as the target class for 4K/60.
SSD capacity and Windows version are requirements
Fable requires 135 GB of available storage, and an SSD is mandatory. This is not merely a capacity check. Having 135 GB free on a mechanical hard drive would not meet the stated SSD requirement.
Windows 10 version 22H2 is the published minimum Windows version. Prospective players should verify that version alongside their CPU, memory, graphics hardware, and SSD free space.
The official FAQ also recommends enabling XMP and Resizable BAR. These are recommendations, not substitutes for meeting the stated processor, RAM, GPU, VRAM, Windows, and storage requirements. Anyone considering firmware changes should first verify support from their motherboard, processor, memory kit, and graphics card, and should confirm that the system remains stable after any change.
The FAQ says that Fable will offer options for both 30 FPS and 60 FPS. That confirms planned frame-rate options, but it should not be interpreted as a universal 60 FPS guarantee on minimum hardware. The reported target chart instead ties different resolution, quality, and frame-rate goals to progressively stronger hardware.
DLSS and FSR are confirmed, but test conditions are not
The Steam listing confirms support for Nvidia DLSS and AMD FSR in connection with 4K visuals. It is therefore inaccurate to describe upscaler support as entirely unannounced.
However, two uncertainties remain important for PC buyers. First, the available official material does not confirm Intel XeSS. Intel Arc users should not assume XeSS support simply because DLSS and FSR are named.
Second, the published resolution and FPS targets should not be described as native-resolution benchmark results. The available information does not say whether DLSS or FSR was enabled for the Low, Medium, High, or Ultra targets, which quality modes may have been used, or which scenes and drivers formed the basis of testing. A 4K/60 target reached with upscaling can impose very different rendering demands from a native 4K/60 result.
Until the developer clarifies those conditions or releases detailed PC benchmarks, the safer reading is to treat the figures as stated performance targets, not fully reproducible benchmark presets.
How to check a current Windows PC
Start with the published minimum non-negotiables: Windows 10 version 22H2; an AMD Ryzen 5 2600 or Intel Core i7-6850K; 12 GB RAM; a listed 6 GB-VRAM GPU; and 135 GB available on an SSD. Then select the tier that fits the way you plan to play.
- Players checking older mid-range PCs: Compare the complete system against the Low 1080p/30 target. Do not omit the processor floor, SSD requirement, or Windows version when evaluating a GPU and RAM match.
- Players seeking 60 FPS without pursuing the reported High tier: The official recommended component list and the reported Medium 1200p/60 target are the relevant points of comparison.
- 1440p monitor owners seeking High settings at 60 FPS: Compare against the independently reported High tier, including its 12 GB VRAM figure and stronger CPU requirements, rather than assuming the official recommended 8 GB-VRAM list is sufficient.
- 4K/60 buyers: Treat the independently reported Ultra tier as a high-end target class, with a 16 GB-VRAM GPU requirement and powerful listed CPU options.
Fable’s requirements are neither an automatic barrier for every older PC nor evidence that every system meeting the minimum will deliver the same experience. The baseline is associated with Low 1080p/30, while the reported 1440p/60 and 4K/60 goals move into substantially stronger component tiers.
The most useful question is not simply whether the game can launch. It is which published resolution, settings, and frame-rate target matches the display and experience you want. With launch set for February 2027, the exact optimization picture and the relationship between DLSS/FSR and the targets may still change. For now, Windows players should reserve SSD space, verify the full minimum checklist—including its CPU floor—and use the target tier, rather than a generic recommended label, to guide any purchase or upgrade decision.