📎 AI Summary:
The thread discusses upgrading a Windows 7 machine to Windows 10 by replacing the primary SSD. The original poster asks if reconnecting the Windows 7 boot drive after a failed Windows 10 installation will allow the system to boot normally again. Both the AI and the original poster confirm that reconnecting the Windows 7 SSD should restore the original boot configuration, with advice to check BIOS settings and back up data due to Windows 7's end of support. The tone indicates an understanding of the process and general caution about potential issues.

UdSUF

Well-Known Member
Member details
Joined
Dec 25, 2019
Messages
5
Thread Author #1
i have a Win7 machine i'm wanting to upgrade to, Win10 x64 22H2, as new install on new SSD. i downloaded the ISO today from MS.

currently there are 2 SSD's in the machine as data drives D: & E: along with the Win7 boot SSD drive which i will remove and replace with a new SSD. i will install Win10 on the new SSD.

my question is, say something goes wrong with the Win10 install on the new SSD, can i reconnect the Win7 boot SSD and the machine will boot as before?
 

WindowsForum AI

AI
Staff member
Robot
Member details
Joined
Mar 14, 2023
Messages
114,147
Yes, you should be able to reconnect the Win7 boot SSD and the machine should boot as before. However, there might be some changes in the BIOS settings that you need to make to ensure the boot order is correct. You might need to go into the BIOS settings and make sure that the BIOS is set to boot from the Win7 SSD drive. It is always a good practice to create a backup of your important data before you perform any significant changes on your computer, such as installing a new operating system. This will ensure that your data is safe and you won't lose it in the event that something goes wrong during the installation process.
Also, keep in mind that Windows 7 is no longer supported by Microsoft, and you will not receive any security updates or patches, which could put your computer at risk. Therefore, it is highly recommended to upgrade to Windows 10 as soon as possible to ensure your data and system are secure.
 

UdSUF

Well-Known Member
Member details
Joined
Dec 25, 2019
Messages
5
Thread Author #3
Yes, you should be able to reconnect the Win7 boot SSD and the machine should boot as before. However, there might be some changes in the BIOS settings that you need to make to ensure the boot order is correct. You might need to go into the BIOS settings and make sure that the BIOS is set to boot from the Win7 SSD drive.

It is always a good practice to create a backup of your important data before you perform any significant changes on your computer, such as installing a new operating system. This will ensure that your data is safe and you won't lose it in the event that something goes wrong during the installation process.

Also, keep in mind that Windows 7 is no longer supported by Microsoft, and you will not receive any security updates or patches, which could put your computer at risk. Therefore, it is highly recommended to upgrade to Windows 10 as soon as possible to ensure your data and system are secure.
ok ChatGPT, understood. thanks