Considering how larger data size has become these days, So i upgraded my entire system so I can save time while copying data but ran into below probelm.
Can anyone make me understand?
*Scenario one*
Copying data from
Samsung T7 2TB ssd, Up to 1,050MB/s USB 3.2 Gen 2 (10Gbps) specs...
angelbird
bottleneck
camera files
canon
card reader
configuration
copy speed
data transfer
nikon
pc specs
performance
problem
raid0
samsung t7
sandisk
ssd
threadripper
type-a
type-c
usb 3.2
I got myself a Silicon Image 3114 SATA Controller which is capable of RAIDing two discs. I have two SSD sporting approx. 230 GB each. I wanted to enable RAID 0 (striping) to have one "virtual" drive of 450 GB.
I followed the steps below:
Installed the 3114 PCI card on my board.
Connected the...
A couple of weeks ago I got a message that I had virtually no space on my C drive (3 x 40GB SSD in RAID 0). This was a big surprise. I am running Windows 7 PRO. I removed some restore points to get back to 7 GB of free space. I then did a disk cleanup to get to 11 GB. Since then, the free...
data management
disk cleanup
disk space
disk usage
free space
free space variability
hardware failure
performance
raid0
restore points
ssd
storage issue
storage raid
system performance
troubleshooting
windows 7
windows experience index
So, Asus A8N-SLI Deluxe with Silicon Image 3114 SATA Raid on motherboard...
Got everything up and running on Windows 10 x32 (x64 won't load, I think it does see enough RAM) thanks to Neemobeer.
In order to boot into Windows I must configure something on the SI RAID controller. If I don't...
asus a8n-sli
boot issues
configuration
disk size
hard drives
motherboard
neemobeer
pci device
raidraid0raid 1
raid 5
raid array
sata
silicon image
storage
tech support
windows 10
windows issues
x32
Running Windows 7 in a RAID 0, and periodically I will get a boot failure error with the message No default or UI configuration directive found. This usually happens if I do some kind of heavy maintenance on my system. For example I might remove my graphics card or cpu cooler to blow the dust...
Hello all, this is my first post, I have bought two OCZ SSD's and have tried to set up a raid 0 I have set the bios on my Gigabyte EX-58-UD5 and saved. The problem is I do not get the next screen that the manual says (press G+I) It just goes on and fails to boot
I have got past that problem it...
I know this is probly a question asked before, but I have two 1.5tb drives I would like to set up in RAID 0. What is the largest size RAID 0 Windows 7 Home Premuim will support for a boot?
Alright , I had this problem previously, and fixed it both times eveuntully. My problem is this , I can't install my Windows Ultimate 64 bit edition on my RAID 0 Western Digital 500GB hdd's because on the boot screen my computer keeps telling me to "Reboot and select proper boot device or insert...
64 bit edition
atapi cd
blu ray drive
boot issues
boot priority
cd/dvd drive
clean install
custom install
error messages
game backup
hardware setup
hdd setup
media issues
raid0raid installation
system configuration
troubleshooting
western digital
windows installation
windows ultimate
Ok, I am in a bit of a pickle here. I recently built a new computer, installed my Windows 7 Ultimate 64-bit along with 100 different programs I have on my new 1TB HDD. I would really like to take advantage of getting another identical 1TB HDD and have them in a RAID 0 configuration. Of course, I...
I've run out of space on my 320G "C" drive, and would like to add a second identical hard drive in a RAID 0 array on my Gigabyte EP45-DQ6 motherboard to improve both speed and space. This, of course, means wiping out the existing OS, and I don't want to do a fresh install if I can avoid it.
I...
ahci
backup
cloning
configuration
data recovery
drivers
gigabyte
hard drive
installation
motherboard
norton ghost
os upgrade
partitions
performance
raid0
storage
system restore
windows 7
windows backup
Bij een poging om partitie op een raid0 configuratie met een proefversie van w7x64 via de installatie dvd van die proefversie te verwijderen is de boel vastgelopen. Na opnieuw opstarten bleken mijn 32bits versie van w7 en ubuntu 9.10 op partities van de zelfde raid configuratie niet meer...
My computer has two Western Digital Caviar Black WD5001AALS 500GB hard drives configured in Raid 0. As the ASUS P6T Deluxe V2 motherboard begins to POST both hard drives are shown on the POST screen but one of the two hard drives is in red letters with the message "Error Occurred (0)". Windows 7...
this is a post i found someone else did, it was for an external drive but worked just great with my internal Sata drive
Go to:
control panel
administrative tools
computer management
disk management
scroll down the list of drives and your drive should be there. highlight the desired drive...
Hi guys, I'm going to upgrade to windows 7 next month, December 1st to be precise.
I am currently using a Hitachi Deskstar 7K1000.B 1TB (1000gb) hard drive.
I'd like to start a fresh with a new hard drive, (another hitachi deskstar 7K1000.B 1tb) so i can transfer over a few files, and also...
Worked on this for a few hours tonight and have become disheartened enough to ask for help.
I cleared two of my 640gig WD caviar blacks in preparation of this fresh windows 7 install. I have a copy of Win 7 Pro x64 through my school (MSDNAA) and am trying to install it on to these disks...
I am running out of hair to pull out here.
Installing Windows 7 RC on my box (MSI K9A2VM-FD mobo)
with a raid 0 setup. Using onboard "fakeraid" AMD sb700 chipset.
I have setup the two drives in the raid manager (1 seagate 250 and 1 seagate 160) to be a part of the array. I end up with a...
I found a possible bug in the Windows 7 install. It does not work if the partition you are installing to is 2 TB. You have to make sure the size is 2 TB minus about 4 Gigs. I made my partition 2 TB - 7 gigs.
I found this when was running into problems installing on my Nvidia raid 0 setup. I...
I have been reading about these external RAID enclosures and have been wondering whether to get one or not. The idea of a RAID 1 +0 appeals to me for the sake of security but does it give a better performance or is it just a lot more to go wrong and a waste of money.
Anyone care to enlighten me...