yk62x86 yk62x86.sys Mon Feb 23 09:44:18 2009
chkdsk /r C:
Thanks for all your help i installed all the things u told me to and did all the things u said hopefully they will work and if they don't i guess i buy a new hard drive
Buying a new hard drive won't solve the issue if you install the same software again. You could just wipe hard drive clean with a low-level format and re-install Windows 7.
Also, if you installed Windows 7 as an "upgrade" install over the previous OS such as Vista, that will cause problems too.
Be sure you download the latest drivers for all the hardware on your system and motherboard chipsets. That's one of the most critical aspects of a good clean install.
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [E:\Temp\Rar$DI00.856\082110-18423-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0x82810000 PsLoadedModuleList = 0x82958810
Debug session time: Sat Aug 21 09:46:45.469 2010 (UTC - 4:00)
System Uptime: 0 days 0:33:37.263
Loading Kernel Symbols
...............................................................
................................................................
.......................
Loading User Symbols
Loading unloaded module list
......
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: c049e8d0, lock type that was held (value 1,2,3, or PTE address)
Arg2: c0000185, error status (normally i/o status code)
Arg3: 346108c0, current process (virtual address for lock type 3, or PTE)
Arg4: 93d1a3cc, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
Debugging Details:
------------------
ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.
DISK_HARDWARE_ERROR: There was error with disk hardware
BUGCHECK_STR: 0x7a_c0000185
Very likely, I'm afraid that a new hard drive is going to be necessary since these 0x7a stops are caused by bad blocks and not any software that was installed (or not installed.)
Basically, they're indicative of a physically failing hard drive and any kind of format can not repair that.
If money is a concern, then trying to low level format the hdd and re-installing Windows, of course can be tried. There's nothing wrong with the attempt.
There is a hardware issue though. If it isn't the actual drive itself gone bad, it is the cooling of the laptop itself that has gone bad which is causing the hdd to work in temperatures it doesn't like.
Yes, but again, you are having a hardware error which this can not fix. You'll be much more likely to have any success by running the chkdsk command.
If you still wish to low level format for any reason, Killdisk software can do this for you.
Yea maybe but i have installed vista os like 20 times and win7 os 2 or 3 times and it has been the same problem and i have dropped my laptop before not from a huge height since after that i got problems
For sure, the HDD is damaged. Forget everything else in this thread. Purchase a new HDD and install.
Best of luck.