- Thread Author
- #1
I have been receiving multiple stop errors (memory Management) lately and its getting really annoying now. If you guys would kindly help me out trying to solve my issue thanks.
Motherboard: ASUS p8h67-m2/tsp/si
Power Supply OCZ xstream-pro 700Watts
RAM: Corsair 8gb DDR3 1066MHZ(Lowered the speed to increase stability) XMS3 dual channel memory kit rating on the ram 9-9-9-24
Processor: i3-2120 lga 1155 3.30ghz
Graphic Card: ASUS GTX 650ti
I did memtest86+ overnight for 9 hours and 20 minutes no errors 7 passes did prime95 small failed after 7 hours in to the test did blend failed after 4 hours in and sometimes fails after clicking start torture test. CPU average temperature is around 50-65 on full load never goes over 70
Motherboard: ASUS p8h67-m2/tsp/si
Power Supply OCZ xstream-pro 700Watts
RAM: Corsair 8gb DDR3 1066MHZ(Lowered the speed to increase stability) XMS3 dual channel memory kit rating on the ram 9-9-9-24
Processor: i3-2120 lga 1155 3.30ghz
Graphic Card: ASUS GTX 650ti
I did memtest86+ overnight for 9 hours and 20 minutes no errors 7 passes did prime95 small failed after 7 hours in to the test did blend failed after 4 hours in and sometimes fails after clicking start torture test. CPU average temperature is around 50-65 on full load never goes over 70
- Joined
- Mar 22, 2010
- Messages
- 3,046
If Prime95 failed, it's either your memory, CPU, or memory controller (which is on the CPU in an i-series processor).
Try the CPU stress tests at this link: Link Removed
If a couple of those tests pass, then run Prime95 Blend test on each stick of RAM individually. Then try one of the sticks that passed in each of the slots (in order to rule out the slots being bad).
Please provide this information so we can provide a complete analysis: Link Removed
If that doesn't isolate the problem, they try these 2 things:
- run all the hardware diagnostics from here: Link Removed
- run Driver Verifier according to these directions: Link Removed
Analysis:
The following is for informational purposes only.
3rd Party Drivers:
The following is for information purposes only.
Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Try the CPU stress tests at this link: Link Removed
If a couple of those tests pass, then run Prime95 Blend test on each stick of RAM individually. Then try one of the sticks that passed in each of the slots (in order to rule out the slots being bad).
Please provide this information so we can provide a complete analysis: Link Removed
If that doesn't isolate the problem, they try these 2 things:
- run all the hardware diagnostics from here: Link Removed
- run Driver Verifier according to these directions: Link Removed
Analysis:
The following is for informational purposes only.
Code:
[font=lucida console]**************************Thu Mar 28 20:45:08.531 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\Owner\SysnativeBSODApps\032813-18922-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Built by: [B]7601[/B].18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:[B]0 days 4:51:42.811[/B]
Probably caused by :[B]ntkrnlmp.exe ( nt!CmpDelayDerefKeyControlBlock+f )[/B]
BugCheck [B]50, {ffffb8a00013c820, 0, fffff80002dc4597, 7}[/B]
BugCheck Info: [B]Link Removed[/B]
Arguments:
Arg1: ffffb8a00013c820, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80002dc4597, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000007, (reserved)
BUGCHECK_STR: 0x50
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: [B]X64_0x50_nt!CmpDelayDerefKeyControlBlock+f[/B]
CPUID: "Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz"
MaxSpeed: 3300
CurrentSpeed: [B]3292[/B]
BIOS Version 1103
BIOS Release Date 11/08/2012
Manufacturer System manufacturer
Product Name System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
[/font]
3rd Party Drivers:
The following is for information purposes only.
Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.
Code:
[font=lucida console]**************************Thu Mar 28 20:45:08.531 2013 (UTC - 4:00)**************************
intelppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD)
nx6000.sys Wed Jan 27 18:36:09 2010 (4B60CDE9)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
AsUpIO.sys Mon Aug 2 22:47:59 2010 (4C57835F)
viahduaa.sys Wed Aug 4 03:51:53 2010 (4C591C19)
AsIO.sys Mon Aug 23 21:53:02 2010 (4C7325FE)
HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7)
Rt64win7.sys Fri Jun 10 02:33:15 2011 (4DF1BAAB)
nvhda64v.sys Wed Dec 19 00:41:41 2012 (50D15395)
nvlddmkm.sys Sat Feb 9 18:13:08 2013 (5116D804)
[/font]
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
- Thread Author
- #3
I did the tests you told me to do and passed a couple of them and did blend test on prime 95 on all 4 ram slots on the ram stick that passed. All of them seems to be running fine with no errors im gonna try the other stick to see if its that ram stick that is defected.
i have been receiving another bsod these couple of days called page fault on non paged area does that mean my hard drive is faulty?
Also can it be the i3 Processor that cant support dual channel memory since on the box of the RAM it only showed I5 and i7 supported but on the site it said it also supports i3 processors as well (found the problem has nothing to do with dual channel i believe the memory management was due to a defected ram)
i am still receiving stop error page fault on non paged area here is the latest mini dump
i have been receiving another bsod these couple of days called page fault on non paged area does that mean my hard drive is faulty?
Also can it be the i3 Processor that cant support dual channel memory since on the box of the RAM it only showed I5 and i7 supported but on the site it said it also supports i3 processors as well (found the problem has nothing to do with dual channel i believe the memory management was due to a defected ram)
i am still receiving stop error page fault on non paged area here is the latest mini dump
Last edited:
- Joined
- Mar 22, 2010
- Messages
- 3,046
This error is most often found to be associated with a driver problem - and not a piece of hardware (like your hard drive).page fault on non paged area
But, just in case, please run these free hard drive diagnostics on all hard drives: Link Removed
Since there's no definite blame assigned in the memory dump, please try running Driver Verifier according to these instructions: Link Removed
Analysis:
The following is for informational purposes only.
Code:
[font=lucida console]**************************Sat Mar 30 21:01:50.065 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\Owner\SysnativeBSODApps\033013-18844-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Built by: [B]7601[/B].18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:[B]0 days 0:04:41.579[/B]
Probably caused by :[B]ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+43781 )[/B]
BugCheck [B]50, {ffffda80037e9350, 1, fffff80002a910cc, 7}[/B]
BugCheck Info: [B]Link Removed[/B]
Arguments:
Arg1: ffffda80037e9350, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff80002a910cc, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000007, (reserved)
BUGCHECK_STR: 0x50
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: [B]X64_0x50_nt!_??_::FNODOBFM::_string_+43781[/B]
CPUID: "Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz"
MaxSpeed: 3300
CurrentSpeed: [B]3292[/B]
BIOS Version 1103
BIOS Release Date 11/08/2012
Manufacturer System manufacturer
Product Name System Product Name
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
[/font]
3rd Party Drivers:
The following is for information purposes only.
Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.
Code:
[font=lucida console]**************************Sat Mar 30 21:01:50.065 2013 (UTC - 4:00)**************************
intelppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD)
nx6000.sys Wed Jan 27 18:36:09 2010 (4B60CDE9)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
AsUpIO.sys Mon Aug 2 22:47:59 2010 (4C57835F)
viahduaa.sys Wed Aug 4 03:51:53 2010 (4C591C19)
AsIO.sys Mon Aug 23 21:53:02 2010 (4C7325FE)
HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7)
Rt64win7.sys Fri Jun 10 02:33:15 2011 (4DF1BAAB)
nvhda64v.sys Wed Dec 19 00:41:41 2012 (50D15395)
nvlddmkm.sys Sat Feb 9 18:13:08 2013 (5116D804)
[/font]
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed
- Thread Author
- #5
- Joined
- Mar 22, 2010
- Messages
- 3,046
Similar threads
- Replies
- 4
- Views
- 7K
- Replies
- 4
- Views
- 1K
- Replies
- 3
- Views
- 3K
- Replies
- 15
- Views
- 6K