jammas615

New Member
Joined
Mar 30, 2012
Messages
2
I have a WD 320Gb 3.5inch hard drive that was originally bought as an external drive in an enclosure. A few months ago, while booting, my computer would go through blue screens one after another if the external hard drive was switched on from the enclosure when the computer was started. I never really did anything about that, just left it off and turned it on when i needed it. Mind you, it and the computer still seemed to work fine.

Now i have decided to keep it internally. So, as soon as i booted up after connecting up the same drive, i'm going through these exact same blue screens again. I'm not 100% sure if that is the cause but signs point to it.

Here's the blue screen info:
The error message is:
IRQL_NOT_LESS_OR_EQUAL
and the stop info is:
STOP: 0x0000000A (0x000000B0, 0x00000002, 0x00000000, 0x82250B04)

and finally, here's the picture i took of the blue screen, a bit is cut of but i know it says "IRQL" on the left hand side.
Link Removed

I'm really not sure what the problem is, any help or information would be helpful.

Thanks in advance.
 


Solution
Hello and welcome to the forums.
First make sure your machine is configured properly to facilitate the collection of .dmp files.
Go to Start and type in sysdm.cpl and press Enter

Click on the Advanced tab
Click on the Startup and Recovery Settings button
Ensure that Automatically restart is unchecked
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump << where your .dmp files can be found later
Click OK twice to exit the dialogs, then reboot for the changes to take effect.
Then:
Please read the first post in this sticky thread here Link Removed...
Hello and welcome to the forums.
First make sure your machine is configured properly to facilitate the collection of .dmp files.
Go to Start and type in sysdm.cpl and press Enter

Click on the Advanced tab
Click on the Startup and Recovery Settings button
Ensure that Automatically restart is unchecked
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump << where your .dmp files can be found later
Click OK twice to exit the dialogs, then reboot for the changes to take effect.
Then:
Please read the first post in this sticky thread here Link Removed
Do your best to accumulate the data required.
Run the SF Diagnostic tool (download and right click the executable and choose run as administrator)
Download and run CPUz. Use the Windows snipping tool to gather images from all tabs including all slots populated with memory under the SPD tab.
Likewise RAMMon. Export the html report, put everything into a desktop folder that you've created for this purpose, zip it up and attach it to your next post (right click it and choose send to, compressed (zipped) folder.
Additionally, if you haven’t already, please take some time and fill out your system specs in your forum profile area Link Removed .
Good luck
Randy
 


Solution
Back
Top