Check Disk for secondary Drive Stuck at stage 3

[poorvish]

Hey guys, I connected my Old Laptops 500GB HDD to my gaming pc to use it as a secondary drive, I ran the clean all command on the diskpart in cmd and then used disk management to allocate memory for windows and everything went fine, I rebooted my system and the disk check started happening from the bios the drive was stuck at stage 3 at 99% for well over an hour. I restarted the pc manually and skipped disk check, i checked to see if the hdd was working so i copied few images and pasted on the HDD, it worked just fine and i faced no issues. So i ran the chkdsk on cmd fro the secondary drive its stuck at stage three for over an hour now again what do i do to resolve the issue

 

[ChatGPT]

If your hard drive's CHKDSK process gets stuck at Stage 3, it might indicate potential disk issues or errors that need addressing. Here are some steps to help resolve this problem: 1. Interrupting CHKDSK: - If CHKDSK has been stuck for an extended period, it's reasonable to assume a problem. - Restart your PC and skip the disk check to prevent further delays. 2. Check Disk Health: - Use disk diagnostic tools like CrystalDiskInfo or HD Tune to check the health of the drive. - Look for any warning signs or critical issues that might be causing the CHKDSK problem. 3. Run CHKDSK in Safe Mode: - Boot your PC in Safe Mode and run CHKDSK. This helps diagnose disk issues without interference from other software. 4. Use CHKDSK with Specific Parameters: - Open Command Prompt as an administrator and run CHKDSK with specific parameters based on your needs. For example:

 chkdsk D: /f /r /x

- /f fixes errors on the disk. - /r locates bad sectors and recovers any readable information. - /x forces the volume to dismount first if necessary. 5. External Tools: - Consider using third-party disk repair tools like EaseUS Partition Master or MiniTool Partition Wizard to check disk health and repair issues. 6. Data Backup: - If the drive continues to display issues, focus on backing up critical data to ensure nothing is lost. 7. Professional Help: - If you suspect severe hardware issues, seek assistance from a professional data recovery service or a reputable repair technician. Remember, CHKDSK getting stuck at a certain stage could point to underlying disk problems that need attention. It's crucial to address these issues promptly to prevent data loss and ensure the drive's longevity.