ohh I have one too .. I have tried this but it does not work in the step you say :
"...1Window should say "Installing driver software". .."
it says :
"windows was unable to install your usb camera
windows could not find driver software for your device ..........
"
I have the zip from the link and I have unzip and point the driver update to that directory...
Rui
Portugal tb
"...1Window should say "Installing driver software". .."
it says :
"windows was unable to install your usb camera
windows could not find driver software for your device ..........
"
I have the zip from the link and I have unzip and point the driver update to that directory...
Rui
Portugal tb
HI All well I have the Philips ToUcam Pr Camera running on Windows Vista 32bit, it took some time but after running what I found erlier on this page I got it all working after downloading the drivers as instructed, so here it is again go to this page, Drivers Philips ToUcam XS/Fun/Pro/Pro 3D version 1.07.0.0 pour Windows Vista then all the way to the bottom and on the left hand site you will see a ICON looking like a HDD drive click on it and save the file to your desktop or where ever you want to remember where you saved it, then find it and unzip it to a directory that you have called ToUCAM Drivers ofr Vista or something like that, then once you have them, plug in the cam, Vista will say that it has seen a new device,ok from there on follow this list.
Found New Hardware\" window will come up. Select \"Locate and install driver software\"
IMPORTANT! Cancel this window!!!
Go to Control Panel - System - Device Manager.
You will see, under \"Other devices\" an \"Unknown device\".
That is the ToUcam...
Right-click \"Unknown device\" then choose \"Update Driver Software...\"
An \"Update Driver Software\" window will come up.
Select \"Browse my computer for driver software\"
Browse... to the dirctory where you unzipped the file that you downloaded erlier.
Make sure \"include subfolders\" is checked (shouldn't matter but that's what I'm doing...)
Choose \"Next\".
1Window should say \"Installing driver software\".
System will complain about not being able to verify the publisher. Choose \"Install this driver software anyway.\"
16After some delay, a window will come up and say \"Windows has successfully updated your driver software\". Your camera should now be working.
NOw I have used these drivers on a number of PC's all with Vista including my laptop and the Cam works every time.
If any one is still having trouble then they can mail me at [email protected] and I will send you the zipped file for you to unzip and then follow the instructions above.
Regards T J Kerriagn (Highlander1UK)