Windows Vista Fixing External Hard Drive Recognition Issues in Windows Vista

ddrgsd

New Member
Joined
Feb 8, 2007
Messages
8
It seems that Vista will not recognize my external hard drive, a Lacie Bigdisk.
It says that I'm missing a driver, but the thing is, it never required a driver in Windows 2000, or XP.

My question is, Is it possible to use a generic driver for this, or do I just have to wait for Lacie to create a driver for it?
 

Solution
U
TUSB6250 Boot Device

Link Removed due to 404 Error

says

My Big Disk will not mount or is not detected. The System Profiler on my Mac or Device Manager on Windows lists it as unknown with the name TUSB6250 Boot Device.

Please try the following:

# Disconnect all cables connected to the drive.
# Connect the power cable to the drive.
# Connect the USB-cable. First to the drive. Then to the computer.

If the drive is detected correctly the problem was probably caused by improper shutdown or un-mount (unplugging the cable without dismounting first, etc.). When this has happened, the USB-interface needs to reset itself properly. After this, reconnection should be no problem.
now i am getting 'USB Mass Storage Device' error where the error is stating that device cannot start. I tried updating the driver to no avail - please help!!!
 

Re: Thanks

Well, I'll be darned. This worked. Make sure you don't hit the power button on the front of the drive. Just let it power on automatically when you connect the USB cable to the computer.

Thanks to the person that gave the cable connection sequence!

thanks here too. Been giving me trouble all week
 

Thanks!!!

You are the man.
 

Re: TUSB6250 Boot Device

thanks this work a treat
 

Thank you so much!!!

You saved me from tearing my hair out.
 

You are indeed, as they say, "the man"...

From yet another happy forum user
 

Man, I was getting ready to throw my drive against the wall.
Thanks man, you're a champ. Lacie oughto put this info on their support pages.

Thanx again
Tom
 

Thanks A Lot,really Helped Me Out
 

Finally!!

Thanks Man!!!!
 

Had me sweating a bit..until i found this JEM!!!!

Nice one
 

Re: TUSB6250 Boot Device

Thanks for the tip. Worked fine for me.
 

It is nt working for me.
what should I do? connect through the FW?
 

AMAZING..whoever you are you are one great person.
I am now however worried that after searching for a solution to my problem I had top trawl through hundreds of 'never buy lacie big disk' reviews.
This could have cost me dear,
thanks again
 

oh man....i am really happy....thought i had a broken drive and all data gone...great!!!!!!!

Peter from NL
 

You are an international superstar!!!!!! Can I have your babies?
 

Had the exact same problem (after a power outage).

Your solution worked perfectly - very many thanks!!

Philip
 

Thank you so much. I thought I had lost all of my stuff!
 

Omg ty ty ty!!!! I thought i lost everything!!!! I feel so much better now :) you made my day!!!!!
 

It works for xp as well. I thank you as well !
 

your advice saved me lots of time. thanks a lot man. you're a genius.
 

Back
Top