Windows 7 Frequent BSOD 0x000009F on Lenovo X240 Running Windows 7 Professional—Need Help!

[Tun1]

Lenovo X240 with Windows 7 Professional 32btis having BSOD often.
I attached the *.dmp File with this post.
Please kindly share with me your advise.

P.s: Already updated LAN & wifi Drivers but still the same.

 

[kemical]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, 8976dd80, 8078adb0, 895199e8}

*** WARNING: Unable to verify timestamp for iusb3hub.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3hub.sys
Probably caused by : iusb3hub.sys

Followup: MachineOwner

Hi,
all your dump files were similar to the above and basically mean that a component didn't reach a particular power state within an allotted period of time. Your later dumps don't show any particular driver at fault although luckily your earlier dumps do..

It seems your Intel USB3 driver is at fault and needs updating.

Laptop drivers are almost exclusively supplied by the manufacturer apart from some gpu drivers and your driver support page has does indeed have updates available. The link is for the USB 3 driver but I would go through all of your drivers and update them to the most recent versions available.
Link Removed

 

[Tun1]

I already update USB driver as your advise. Will monitor and if still have problem let you know again.
Thanks Kemical.

 

[kemical]

Thanks for the update. . I hope all goes well but if not please post back.