- Thread Author
-
- #1
Hey guys,
I've encountered this pretty nasty problem in the last few months. Started in the end of December, and slowly getting worse. Seems totally random, i cant link it with any of my programs or activites. The notebook doesnt boot up every time after the BSODs. I have an ASUS F3T-AP026 notebook, with 2x1G Kingsmax RAM. This time i can only upload 1 minidumb file, since i tried to install another Windows 7 last night. This time a "memory_management" happened, but before i encountered "bad_pool_header" "irql_not_less_or_equal" "driver_irql_not_less_or_equal" "reference_by_pointer" and i think there were some others that i dont remember. I even sent my notebook to the country ASUS service, but they said in 3 days they didnt encounter the problem. Hope someone can help. thanks in advance
Link RemovedLink RemovedLink Removed
RAMMon v1.0 Build: 1002 built with SysInfo v1.0 Build: 1006
PassMark (R) Software - www.passmark.com
Memory Summary For SC-PC
Number of Memory Devices: 2 Total Physical Memory: 2047 MB (2048 MB) Total Available Physical Memory: 785 MB Memory Load: 61%
ItemModule #1Module #2Ram Type DDR2 DDR2 Standard Name DDR-667 DDR-667 Module Name PC-5300 PC-5300 Memory Capacity (MB) 1024 1024 Bus Clockspeed (Mhz) 333.33 333.33 Jedec Manufacture Name Kingmax Semiconductor Kingmax Semiconductor Search Amazon.com Search! Search! SPD Revision 1.2 1.2 Registered No No ECC No No DIMM Slot # 1 3 Manufactured Year 2000 Year 2000 Module Part # KSCD48F-B8MO5 KSCD48F-B8MO5 Module Revision 0x0 0x0 Module Serial # 0x0 0x0 Module Manufacturing Location 65 65 # of Row Addressing Bits 14 14 # of Column Addressing Bits 10 10 # of Banks 8 8 # of Ranks 1 1 Device Width in Bits 8 8 Bus Width in Bits 64 64 Module Voltage SSTL 1.8V SSTL 1.8V CAS Latencies Supported 3 4 5 3 4 5 Timings @ Max Frequency 5-5-5-15 5-5-5-15 Minimum Clock Cycle Time, tCK (ns) 3.000 3.000 Minimum CAS Latency Time, tAA (ns) 15.000 15.000 Minimum RAS to CAS Delay, tRCD (ns) 15.000 15.000 Minimum Row Precharge Time, tRP (ns) 15.000 15.000 Minimum Active to Precharge Time, tRAS (ns) 45.000 45.000 Minimum Row Active to Row Active Delay, tRRD (ns) 7.500 7.500 Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) 60.000 60.000 Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) 127.000 127.000 DDR2 Specific SPD Attributes Data Access Time from Clock, tAC (ns) 0.450 0.450 Clock Cycle Time at Medium CAS Latency (ns) 3.750 3.750 Data Access Time at Medium CAS Latency (ns) 0.500 0.500 Clock Cycle Time at Short CAS Latency (ns) 5.000 5.000 Data Access Time at Short CAS Latency (ns) 0.600 0.600 Maximum Clock Cycle Time (ns) 8.000 8.000 Write Recover Time, tWR (ns) 15.000 15.000 Internal Write to Read Command Delay, tWTR (ns) 7.500 7.500 Internal Read to Precharge Command Delay, tRTP (ns) 7.500 7.500 Address/Command Setup Time Before Clock, tIS (ns) 0.200 0.200 Address/Command Hold Time After Clock, tIH (ns) 0.280 0.280 Data Input Setup Time Before Strobe, tDS (ns) 0.100 0.100 Data Input Hold Time After Strobe, tDH (ns) 0.180 0.180 Maximum Skew Between DQS and DQ Signals (ns) 0.240 0.240 Maximum Read Data hold Skew Factor (ns) 0.220 0.220 PLL Relock Time (ns) 0.000 0.000 DRAM Package Type Planar Planar Burst Lengths Supported 4 8 4 8 Refresh Rate Reduced (7.8us) Reduced (7.8us) # of PLLS on DIMM 0 0 FET Switch External Enable No No Analysis Probe Installed No No Weak Driver Supported Yes Yes 50 Ohm ODT Supported Yes Yes Partial Array Self Refresh Supported No No Module Type SO-DIMM SO-DIMM Module Height (mm) 30.0 30.0
I've encountered this pretty nasty problem in the last few months. Started in the end of December, and slowly getting worse. Seems totally random, i cant link it with any of my programs or activites. The notebook doesnt boot up every time after the BSODs. I have an ASUS F3T-AP026 notebook, with 2x1G Kingsmax RAM. This time i can only upload 1 minidumb file, since i tried to install another Windows 7 last night. This time a "memory_management" happened, but before i encountered "bad_pool_header" "irql_not_less_or_equal" "driver_irql_not_less_or_equal" "reference_by_pointer" and i think there were some others that i dont remember. I even sent my notebook to the country ASUS service, but they said in 3 days they didnt encounter the problem. Hope someone can help. thanks in advance
Link RemovedLink RemovedLink Removed
RAMMon v1.0 Build: 1002 built with SysInfo v1.0 Build: 1006
PassMark (R) Software - www.passmark.com
Memory Summary For SC-PC
Number of Memory Devices: 2 Total Physical Memory: 2047 MB (2048 MB) Total Available Physical Memory: 785 MB Memory Load: 61%
ItemModule #1Module #2Ram Type DDR2 DDR2 Standard Name DDR-667 DDR-667 Module Name PC-5300 PC-5300 Memory Capacity (MB) 1024 1024 Bus Clockspeed (Mhz) 333.33 333.33 Jedec Manufacture Name Kingmax Semiconductor Kingmax Semiconductor Search Amazon.com Search! Search! SPD Revision 1.2 1.2 Registered No No ECC No No DIMM Slot # 1 3 Manufactured Year 2000 Year 2000 Module Part # KSCD48F-B8MO5 KSCD48F-B8MO5 Module Revision 0x0 0x0 Module Serial # 0x0 0x0 Module Manufacturing Location 65 65 # of Row Addressing Bits 14 14 # of Column Addressing Bits 10 10 # of Banks 8 8 # of Ranks 1 1 Device Width in Bits 8 8 Bus Width in Bits 64 64 Module Voltage SSTL 1.8V SSTL 1.8V CAS Latencies Supported 3 4 5 3 4 5 Timings @ Max Frequency 5-5-5-15 5-5-5-15 Minimum Clock Cycle Time, tCK (ns) 3.000 3.000 Minimum CAS Latency Time, tAA (ns) 15.000 15.000 Minimum RAS to CAS Delay, tRCD (ns) 15.000 15.000 Minimum Row Precharge Time, tRP (ns) 15.000 15.000 Minimum Active to Precharge Time, tRAS (ns) 45.000 45.000 Minimum Row Active to Row Active Delay, tRRD (ns) 7.500 7.500 Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) 60.000 60.000 Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) 127.000 127.000 DDR2 Specific SPD Attributes Data Access Time from Clock, tAC (ns) 0.450 0.450 Clock Cycle Time at Medium CAS Latency (ns) 3.750 3.750 Data Access Time at Medium CAS Latency (ns) 0.500 0.500 Clock Cycle Time at Short CAS Latency (ns) 5.000 5.000 Data Access Time at Short CAS Latency (ns) 0.600 0.600 Maximum Clock Cycle Time (ns) 8.000 8.000 Write Recover Time, tWR (ns) 15.000 15.000 Internal Write to Read Command Delay, tWTR (ns) 7.500 7.500 Internal Read to Precharge Command Delay, tRTP (ns) 7.500 7.500 Address/Command Setup Time Before Clock, tIS (ns) 0.200 0.200 Address/Command Hold Time After Clock, tIH (ns) 0.280 0.280 Data Input Setup Time Before Strobe, tDS (ns) 0.100 0.100 Data Input Hold Time After Strobe, tDH (ns) 0.180 0.180 Maximum Skew Between DQS and DQ Signals (ns) 0.240 0.240 Maximum Read Data hold Skew Factor (ns) 0.220 0.220 PLL Relock Time (ns) 0.000 0.000 DRAM Package Type Planar Planar Burst Lengths Supported 4 8 4 8 Refresh Rate Reduced (7.8us) Reduced (7.8us) # of PLLS on DIMM 0 0 FET Switch External Enable No No Analysis Probe Installed No No Weak Driver Supported Yes Yes 50 Ohm ODT Supported Yes Yes Partial Array Self Refresh Supported No No Module Type SO-DIMM SO-DIMM Module Height (mm) 30.0 30.0