L
could you please tell me how to place module's in other bank's so i could try your theory as it's the only one i can foolow. thankyou.Hello,
I am from Romania and i'm not as good at spelling english as speaking...
The Memory_Management blue screen error that you have is a RAM problem.
I had this proplem and it ocoured often but I fixed it with a simple solutin: well ia have 3 banks of RAM on my notherboard and 2 Ram modules (2x512mb) so placed one module in the firs bank and the seond module of Ram in the third bank, leaving the middle bank empty. I never saw the blue screen again.
If you have the same situation , do what I did.
If you have only one module and at least two banks, try switching it's place.
If you have the same no. of modules and banks, try switching betwen then.
If none of this works try exchangeing Ram with a friend. If the problem continues your motherboard is not compatibile with the RAM or it has a defect.
Hope it works ...
HI,
Well that's not entirely true. Because now its running 3gb and even if i replace the fourth module with one that's in there now, i get an instant error.
And Vista will support 4gb or ram as long as you are using Vista 64bit.
And for the drivers i can only say, i used the same nvidia driver on my new 8800 as on my old 8800. And everything worked fine at first...
I'm sure that in my case one of my RAM-modules broke, and finally i know wich one
Greetz and goodluck