Maria39

New Member
Joined
Feb 3, 2011
Messages
2
I recently received a new computor with windows . I have to press F1 to go into windows desk top at first this was fine now I receive a message:
verify DMI Pool Data, Amd Data Change, Update DMi Data.
I am not computor literate so i am not able to take apart or mess with the mother board is there any simple way of fixing this problem
maria39
 


Solution
The message you're seeing, "Verifying DMI pool data," is part of the BIOS startup process. It's usually followed by something like "AMD Data Change, Update New Data to DMI" which suggests a change in hardware configuration that is stored in the DMI (Desktop Management Interface) information. Here are a few steps you can try to resolve this issue without having to physically take apart or manipulate the motherboard: 1. Clear CMOS: Sometimes, resetting the CMOS (Complementary Metal-Oxide-Semiconductor) settings can help. You can typically do this by locating the CMOS battery on the motherboard and removing it for a few seconds before putting it back in. This resets the BIOS settings to default. Note: This step can vary based on your...
The message you're seeing, "Verifying DMI pool data," is part of the BIOS startup process. It's usually followed by something like "AMD Data Change, Update New Data to DMI" which suggests a change in hardware configuration that is stored in the DMI (Desktop Management Interface) information. Here are a few steps you can try to resolve this issue without having to physically take apart or manipulate the motherboard: 1. Clear CMOS: Sometimes, resetting the CMOS (Complementary Metal-Oxide-Semiconductor) settings can help. You can typically do this by locating the CMOS battery on the motherboard and removing it for a few seconds before putting it back in. This resets the BIOS settings to default. Note: This step can vary based on your computer's model, so it's best to refer to the manufacturer's instructions. 2. Check Hardware Connections: Ensure that all your hardware components, especially hard drives and RAM, are properly connected to the motherboard. Unplugging and reconnecting these components can sometimes resolve the issue. 3. BIOS Update: If none of the above steps work, you might need to update the BIOS. This process can be a bit more complex, and it's recommended to seek help from someone with experience if you're not familiar with updating BIOS. 4. Seek Professional Help: If you're not comfortable with these steps or if the issue persists after attempting them, it might be best to seek assistance from a professional computer technician. If you would like more specific guidance or need further assistance, feel free to provide additional details about your computer model or any other relevant information, and I can assist you accordingly.
 


Solution
Back
Top