trippster2
Well-Known Member
- Joined
- Jun 13, 2020
- Messages
- 8
- Thread Author
-
- #1
Hi...after installing the latest windows 10 update, i cannot get my pc to boot. Actually, it boots, but only into a recovery environment. It says that it is missing a file, \windows\system32\winload.efi. I am trying to avoid doing a full reset, because I really don't want to lose the hundreds of apps I have installed. Does anyone have any ideas on how I might be able to do this? Thanks in advance!
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
Solution
The latest Windows update seems to be full of issues like this. If nothing else works, consider rolling back to the previous version. You can do this from RE by pressing Troubleshoot > Advanced Options > Go back to the previous version
riserbo
Member
- Joined
- Jun 9, 2020
- Messages
- 46
The latest Windows update seems to be full of issues like this. If nothing else works, consider rolling back to the previous version. You can do this from RE by pressing Troubleshoot > Advanced Options > Go back to the previous version
trippster2
Well-Known Member
- Joined
- Jun 13, 2020
- Messages
- 8
- Thread Author
-
- #3
I tried uninstalling both the "feature" and "quality" update options, and it gives the error message "windows ran into a problem and could not uninstall update"
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
trippster2
Well-Known Member
- Joined
- Jun 13, 2020
- Messages
- 8
- Thread Author
-
- #5
I set my pc to update at 2am. When I woke up the next morning, I was in the RE, and haven't been able to get out of it since.
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
trippster2
Well-Known Member
- Joined
- Jun 13, 2020
- Messages
- 8
- Thread Author
-
- #7
No code, and I have turned it off several times
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
trippster2
Well-Known Member
- Joined
- Jun 13, 2020
- Messages
- 8
- Thread Author
-
- #9
Acer v3-771g laptop
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
trippster2
Well-Known Member
- Joined
- Jun 13, 2020
- Messages
- 8
- Thread Author
-
- #11
Ok, did that, system still acts the same
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
trippster2
Well-Known Member
- Joined
- Jun 13, 2020
- Messages
- 8
- Thread Author
-
- #13
Yes, I tried that too. That doesn't work, either.
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
Rapaaja
Active Member
- Joined
- Feb 18, 2019
- Messages
- 280
Just a few reminders before we use the site: This is a non-Microsoft site. This page appears to provide accurate, secure information. Beware of ads on the site that may promote products that are often classified as pup products (potentially unwanted products). Thoroughly research any product advertised on the site before you decide to download and install it.
trippster2
Well-Known Member
- Joined
- Jun 13, 2020
- Messages
- 8
- Thread Author
-
- #15
In order to use that, I would have to be able to get out of the recovery environment, which I cannot, and install the program, which I cannot.
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
Similar threads
- Solved
- Replies
- 1
- Views
- 1K
- Solved
- Replies
- 11
- Views
- 4K
- Solved
- Replies
- 1
- Views
- 1K
- Solved
- Replies
- 16
- Views
- 8K