This guide covers Windows 11 and Windows 10. Allow about 15 minutes for the initial checks; driver installation or printer maintenance may take longer. Before starting, confirm that your printer supports color, is powered on, has paper, and is connected to your PC or network.
1. Check Windows printing preferences
Start with the printer’s default preferences. The names and layout of the color options vary by manufacturer and driver.
Quick walkthrough
Windows 11
- Open Start > Settings > Bluetooth & devices > Printers & scanners.
- Select your printer, then choose Printing preferences.
- Look for a setting such as Color, Color mode, Grayscale, or Black and white.
- Select Color, or turn off grayscale or black-and-white printing.
- Select Apply or OK, if shown.
Windows 10
- Open Start > Settings > Devices > Printers & scanners.
- Select your printer, then choose Manage > Printing preferences.
- Find the color or grayscale setting and select color printing.
- Select Apply or OK, if shown.
The setting may be on a Color, Paper/Quality, or Features tab, or inside an advanced menu. HP’s support guidance, for example, shows that the location varies between its printer drivers.
If you can’t find a color option, double-check that you selected the intended color printer—not a similarly named printer or a PDF printer. A missing option can also point to a driver or managed-printer configuration issue, which we’ll come back to below.
2. Check the app’s print settings
A Windows preference is not the only setting in play. The app’s print dialog may offer its own color choice for the current job.
- Open a document or image that visibly contains color.
- Select File > Print, or press Ctrl + P.
- Select the intended printer.
- Look for Color, Black and white, Grayscale, or a Printer properties option.
- Choose color, check the preview if one is available, and print one page.
Microsoft notes that Word displays color, black-and-white, or grayscale choices when the selected printer supports them. The exact controls depend on the app and printer.
Quick result check: If one app prints in color but another does not, revisit the problem app’s print settings and try a different file in that app. If neither app prints in color, continue with the tests below.
3. Print a Windows test page—and a color sample
A Windows test page helps establish whether Windows can send a job to the printer. It is useful for communication troubleshooting, but it is not a definitive color-quality test: the page may not contain enough color to evaluate every color cartridge.
Print the Windows test page
Windows 11
- Go to Settings > Bluetooth & devices > Printers & scanners.
- Select the printer, then select Printer properties.
- On the General tab, select Print Test Page.
Windows 10
- Go to Settings > Devices > Printers & scanners.
- Select the printer, then Manage > Printer properties.
- On the General tab, select Print Test Page.
These are Microsoft’s documented test-page paths. If the page does not print at all, first address the connection, queue, or printer error rather than assuming it is a color-only problem.
Next, print a known color image or document with Color selected in the app’s print dialog. For a more useful hardware comparison, print the printer’s own print-quality diagnostic page, if the model offers one. Consult its manual for the exact control-panel or manufacturer-app steps.
Here’s how to interpret the results:
- The printer’s own diagnostic page has missing or streaked color blocks: The printer or its supplies are a likely place to investigate.
- The printer’s diagnostic page looks good, but the PC’s color sample is gray: Recheck the Windows and app settings, then investigate the driver or printer queue.
- The sample prints in color: Retry the original document. The original app, file, or job setting may be responsible.
These comparisons narrow the possibilities; they do not prove a single cause. HP, for example, recommends inspecting diagnostic-page color blocks for missing areas, fading, or white lines when troubleshooting affected inkjet models.
4. Check ink or toner and printer maintenance
Check the printer’s display or manufacturer’s app for supply levels and cartridge warnings. If your printer has visible ink tanks, inspect the levels as directed by its manual.
A low reading is a clue, not always proof that a cartridge is empty. HP notes that its ink-level indicators are estimates. If a color is missing or badly faded, follow the printer manufacturer’s instructions for checking, replacing, or reseating the affected supply.
For an inkjet with missing or streaked colors on its diagnostic page, look for a manufacturer-provided printhead or cartridge cleaning function in the printer’s software or control panel. Print another diagnostic page afterward. Don’t run cleaning cycles repeatedly without following the model’s instructions: cleaning can consume ink. Laser printers need model-specific toner and maintenance guidance instead.
5. Update or reinstall the printer driver
If the printer’s own diagnostic page looks good but Windows still won’t print color, a compatible driver may help. Microsoft recommends trying Windows Update for printer drivers first; if that does not resolve the issue, use the printer manufacturer’s official support site.
- Find the printer’s exact model number.
- On the PC, open Settings > System > About and note your Windows version and System type.
- Visit the manufacturer’s official support site and search for that model.
- Download a driver intended for your Windows version and system type.
- Run the installer and follow the manufacturer’s instructions. Restart if prompted.
- Recheck Printing preferences, then print the known color sample again.
Avoid third-party driver-download sites. On a work or school PC, contact your IT administrator before changing a shared printer or its driver; the queue may be managed centrally.
Windows on Arm: Microsoft says some Arm PCs have trouble adding printers with manufacturer installers. Its suggested alternative is Settings > Bluetooth & devices > Printers & scanners > Add device, unless the manufacturer provides different Arm-specific guidance.
If the driver installation doesn’t help, Microsoft also suggests removing and re-adding the printer. Note that removing it can discard local queue settings, so record any custom settings first. On Windows 11, select the printer under Printers & scanners and choose Remove, then Add device. On Windows 10, select it and choose Remove device, then Add a printer or scanner. Recheck the color preference after it is added.
If color is still missing
Run the printer troubleshooter in the Get Help app, or consult the manufacturer’s support instructions for your model. If the printer’s own diagnostic page still has missing colors after the recommended supply and maintenance checks, manufacturer support or service is the next sensible stop.
The goal is simple: a known color sample prints in color from Windows, and the printer’s own diagnostic page shows its expected color patterns. Once both pass, the printer has earned a reprieve from that stern talking-to.