📎 AI Summary:
The thread discusses a user experiencing random BSODs after upgrading to a Samsung EVO SSD, with the error analysis pointing to issues with the Marvel AHCI driver. The responder advises updating drivers, especially the Marvell controller, and suggests using the Intel SATA ports for better stability, citing user reports on performance issues with Marvell controllers. Overall, the discussion guidance focuses on driver updates and hardware configuration adjustments to resolve the BSODs.
W

wesdrum

Well-Known Member
Member details
Joined
Jun 27, 2012
Messages
29
Thread Author #1
Hi,

I have recently installed a new Samsung evo SSD, I also used the supplied software to copy across my windows install. I have used the Samsung magician software and according to this the firmware is up to date for the drive.
Since installing the drive I have noticed I get random BSOD every now and then .
I have uploaded the required files using the W7F Diagnostic tool.
If more info is required please let me know.

Thanks
Wes
 

Attachments

Solution
kemical
Code: 
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3D, {fffff80005002f60, 0, 0, fffff8800117278e}

Probably caused by : mv91xx.sys ( mv91xx+3178e )

Followup: MachineOwner
Hi,
all your dump files were the same as the above and point to the Marvel AHCI driver as the probable cause. I also notice that some of your drivers...
Sort by date Sort by votes
kemical

kemical

Essential Member
Member details
Joined
Aug 28, 2007
Messages
36,163
#2
Code: 
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3D, {fffff80005002f60, 0, 0, fffff8800117278e}

Probably caused by : mv91xx.sys ( mv91xx+3178e )

Followup: MachineOwner
Hi,
all your dump files were the same as the above and point to the Marvel AHCI driver as the probable cause. I also notice that some of your drivers are in need of updating:
In relation to your Marvell AHCI driver I've tried in vain to find an update although this is as close as I got:
Link Removed
However
Reading reports about your motherboard as well as users comments it seems most users end up using the Intel SATA ports (your motherboard has both Intel and Marvell SATA ports). It seems the Marvell controller isn't as fast as the Intel version and many users have had issues with it. (update drivers first before swopping ports)

Link Removed
The board has 8 SATA ports. The three light blue ports on the left (above) are SATA 3.0 GB/s controlled by the Z68 Express Chipset. The two gray ports are SATA 6.0 GB/s and are also controlled by the Intel Z68 express chipset. the two dark blue ports on the right at controlled by the Marvell controller and are rated SATA 6.0 GB/s. The single eSATA 3.0 GB/s port is controlled by the JMicron JMB362 controller.
Click to expand...
Ref:
http://www.kitguru.net/components/motherboard/zardon/asus-p8z68-v-pro-gen-3-motherboard-review/2/

AiChargerPlus.sys Mon Nov 08 06:48:26 2010: ASUS Ai Charger possible BSOD cause uninstall to test.

Please run the Intel driver update utility:
Link Removed

RTKVHD64.sys Tue Nov 23 10:14:08 2010: Realtek High Definition Audio Function Driver please update:
Link Removed

Post any new dump files.
 
Upvote 1 Downvote
Solution
You must log in or register to reply here.