controller

greetings all. i have been using windows 7 for a few months now, and love it, much better then XP and vista. but just today i ran in to a problem. for the past few weeks iv been using two of my hard drives in a RAID-0 array, and its been working fine. today, though, there was an update in...

I'm not sure if this thread is in right place, correct me if Im wrong. The problem is, that whenever I disconnect Xbox 360 controller or Gibson Explorer Controller for Guitar Hero i get Blue Screen of Death with information on IRQL_LESS_OR_NOT_EQUAL, or something like that. Anyone get over that...

I got this NTLDR missing whenever I restart my computer. I got this Lenovo R31 that is running on XP with SP3 but the environment is Vista ready. I can't repair the error using the XP installer as I am getting the message "Setup did not find any hard disk drives installed in your computer"...

running i7 920 with asus gforce295x on an asus p6t deluxe board with 2x1TB samsung hdd and 6gig g.skill ddr3 ram So I changed the harddisk type in bios to raid, I created 2 partitions in dos via the marvell raid controller program, where i set up both partitions to be raid0 Then I proceeded...

Hi, I recently installed Windows 7 and everything has been fine except that I can't get the ethernet controller to work. I know its a marvell and I've tried running both the vista64 and 32 drivers in compatibility mode but neither has worked. Does anyone have any suggestions? Thanks.

I have a Dell Inspiron 700m which has Intel Extreme Graphics 2 (Integrated) and I went to the Intel site to download the driver for it, but it was only available for XP, so I ran that in XP Compatibility Mode. Now when it asks me to restart to finish the installation, I do, and when it starts up...

Hello , I install seven windows and I do not install the Ethernet Controller drivers for my network card is>> 983 AN 10/100 PCI Adapter ADMtek need of help :(:(

No matter what method is used as soon as I cut a graphic, whether it is of the desktop or some other source, the computer becomes completely locked as soon as I paste the image. Intel 82865G graphics controller Pentium 4 3Ghz -- 2GB RAM - 32 Bit system

Ethernet Controller ?? Hello everybody! I wonder if this thread should go here or under Hardware section, but Networking won, I guess :) So, I am here because I have a problem with my Ethernet controller! I just installed Windows 7 build 7000 on my pc, on a clean hard disk. I never had Vista...

Hi guys, I'm having ethernet issues, I have two ethernet controllers, after installing Windows 7 neither of them function 1. is a Marvell Yukon 88E8053 PCI-E Gigabit, I have tried manually installing drivers/utillities for this and get "This installer package does not support the current...

The Driver detected a controller error on: \device\ide\ide port 0 It seems this event causes the desktop of what ever I'm doing to freeze for a while. From the specs below, take out one stick of RAM for 3gb Take out the 80gb ide hard drive THe 500gb SATA drive is partitioned into...

i have an acer aspire 5050, it takes a 2.5 sata drive, but it just wont detect them in bios, there's nothing i can do.... what i was hoping was to get a esata card and plug the drive into that, and install/boot win 7 from there... right now i have xp booting from a usb key but i can't figure...

Hi All I loaded windows 7 beta today on a Shuttle SNG45 with a FN45 motherboard as far as I can tell it is an nvidia 10/100 onboard nic . found 32 bit vista ethernet drivers on nvidia website and drivers did not do a blessed thing, anyone else run into ETHERNET CONTROLLER Driver Error? was...

Can't find drivers for Intel SM Bus controller on ASUS P5Q Pro

I´ve got following problem : I use windows 7 v.7000 Beta 1 and i have no driver for my Network card (Intel 21140) I need badly the Internet Connection for some downloads and so on... I have tried with some drivers but nothing happened. Same problem as before :confused::confused::confused:

I have done a clean install onto a Acer Aspire M1610 (Celeron) desktop computer using Windows 7 (32 bit). I'm getting the dreaded "Windows did not detect a properly installed network adaptor. If you have a network adapter, you will need to reinstall the driver." I have only moved house...

Beta 1 7000 install went very smooth. In looking at the Device Manager I note System Interrupt Controller (listed 9 times) is showing error. I have tried "scan for hardware changes" and "install new drivers" to no avail. Running a Gigabyte GA-EX58-DS4 board with i7 920. I had installed the...

I successfully installed 7 and am quite happy with it, however when ever my internet on the pc cuts out every 10 minuets and the only way to make it work is reset my network adapter! any ideas, i think i have a NVIDIA nForce networking controller...

I have just installed Vista Ultimate and it works great, but my SCSI disks does not show up in Vista. They do show when booting the SCSI bios, and I have tried 3 different disks, and none of them show up when Vista have booted up. The driver for the Adaptec 29160N scsi controller card was...

Hello My system crashed. It says I need to repair the system. When I boot from the install cd and run "repair" no OS's are displayed. My system is on a RAID 5 array that in interfaced through an Adaptec 2410SA PCI SATA contrller. Obviously the driver is not loaded. I went to adaptec.com to get...