netsh

Hi first things first: nothing irrelevant like changing your ISP (not possible), constant phone line services (they don't care) or anything of the sort we simply have a very bad internet (that has surprisingly good down bandwidth 8Mbit) we can only tinker with hoping windows will be more...

I've been having this issue for a while now. Every time I restart my laptop, I get a seemingly empty command window that flashes and then goes away. I managed to get it to stop flashing somehow, and was able to get a better look at it, it had netsh.exe in the command along with some other stuff...

Hi All Experts, I met the issue when I tried to use the netsh trace on Windows 10 build 685. In previous version 630, I use the netsh trace with persist=yes to record the network message and all as normal whatever I restart the OS. But after I update my Windows 10 to build 685, every time...

Hi All Wondering if anyone knows a command to remove the DNS entries within the advanced TCP/IP settings? The primary and secondary DNS IP need to be changed with the tertiary and quaternary DNS IP. Simple enough doing it manually but there's over 50 VMs this needs to be done on so i'm trying...

Im trying to turn my rtl8188ee 802.11bgn wifi adaptor into a hotspot but i cant get it to turn on when i type the following Netsh wlan start hostednetwork Says group or resource not in correct state. Netsh wlan show drivers Hostednetwork support......no So how do i fix? If i up date driver will...

When I use the netsh command to set and start the "Hosted Network", I can set the settings fine, but starting the hosted network yields "The hosted network couldn't be started. The group or resource is not in the correct state to perform the requested operation.". I have already tried the fix...

I have a Toshiba Satelite C75D-B running Windows 8.1.. Basically my computer has stopped using IPv6. It will not work on ANY wifi network I try. I suspect it is the computer and not the networks.. When I open up the wifi status is says IPv6 Connectivity: No Internet Access. I have tried...

Hello in the last 3 weeks I'm having tcpip.sys DRIVER_IQLR_NOt_LESS_OR_EQUAL BSOD error only when emule is running. I didn't change anything in my emule setting lately. my security program is Comodo internet security. I'm having fast internet connection with direct Lan cable. I did this steps...

*NOTE* Please note this only works if you have at least one Windows computer that is able to connect to the wireless access point. *NOTE* This works on Windows 7, 8, 8.1, 10 Press the WinKey and type cmd Right click Command Prompt and select Run as Administrator Type netsh wlan show profiles...

Hello, I am doing work on different network and always i have to change my ip manually, I want to change ip using .bat file ow can i do it? i Found netsh utility solution but it not works properly. please suggest me ..

I set up hosted network and use my Android to connect to it through wifi. So I run netsh after setting up hosted network.it worked fit a while then, although still connected it says, "stops working". I cannot browse or anything that required a connection. Is there a solution? so I tried a...

I randomly keep getting DNS probe errors that cause my Internet to stop working. Usually it starts working after I hit reload a few times but if not, then I have to restart my laptop, router or both, but the issue occurs later. I ran ipconfig /release, renew and refresh but it still occurs...

So I've been using this computer to connect wirelessly to a router in another part of the house for the past few months. Then one day, I started getting this 'Windows was unable to connect to SSID' error message. I've tried the below :- Disabled and enabled the wireless adapter. No effect...

Hello friends, I removed the microsoft virtual wifi miniport from my computer and now after doing all the prescribed methods in all the availlable discusion forum in the internet, i am unable to get back the virtual wifi miniport adaptor... I change my OS also but all in vain. my network card is...

I get an error message every time I shutdown the computer, it says something about netsh.exe not being able to do something that it needs to. The event viewer says that it is event 1002, dhcp-client. Also says "The IP address lease 198.18.64.___ for the Network Card with network address _____...

Windows Firewall settings were exported to a .wfw file. The settings take effect if I manually import them through gpedit.msc and click to import the file. What I really want to have happen is a batch file executes the following: netsh advfirewall import c:\firewall.wfw For some reason using...

Win7Pro Only I'm looking for a scripted solution, or a command line that I can ultimately script. The reason being that I'm supporting 1200 users in remote locations, and I automate as much as I can in batch and VB scripts. I'm not intimately familiar with PowerShell, but I'm not opposed to it...

Link Removed

Hello all, I've got a bit of a strange issue going on with a PC i just put together. Its a Win7 Home Premium machine will all updates and service packs installed. There is no antivirus software or security software or 3rd party firewall software installed...machine is clean though only play...

Hi, In windows 7 if i use Netsh int ipv4 set dynamicport tcp start=49152 num=14847 where is it held in the registry? Thanks R