Windows 10 BSOD after SSD install

[SlyGuy]

I installed a new SSD, not in raid, that was meant to run my virtual machines for school.
This was a few months ago and they have been happening frequently. A full restore of windows was completed yesterday and I deleted everything because I am done with school, the BSOD's are still frequent.
I am getting that the problem is with my processor after looking at the dump files.
Any help is appreciated!
Thanks

 

[kemical]

Hi,
all your dump files were bugcheck 124.

Usually this is commonly associated with a overheating processor so check yours isn't overheating by running a stress test and monitor the temps.

I noticed that your core system drivers are either missing or very old. I included some updates below:

Sata
Link Removed

Chipset
'inf'
Link Removed
'Intel management engine driver'
Link Removed

You can update both Lan and Audio by using the versions found on your motherboard support page:
Z97-A/USB 3.1 Driver & Tools | Motherboards | ASUS United Kingdom

They are'nt the latest versions but better than the ones your using.

Did the bsod's start as soon as you fitted the SSD?