BSOD after new SSD install

wesdrum

Well-Known Member
#1
Hi,

I have recently installed a new Samsung evo SSD, I also used the supplied software to copy across my windows install. I have used the Samsung magician software and according to this the firmware is up to date for the drive.
Since installing the drive I have noticed I get random BSOD every now and then .
I have uploaded the required files using the W7F Diagnostic tool.
If more info is required please let me know.

Thanks
Wes
 


Attachments

kemical

Windows Forum Admin
Staff member
Premium Supporter
Microsoft MVP
#2
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3D, {fffff80005002f60, 0, 0, fffff8800117278e}

Probably caused by : mv91xx.sys ( mv91xx+3178e )

Followup: MachineOwner
Hi,
all your dump files were the same as the above and point to the Marvel AHCI driver as the probable cause. I also notice that some of your drivers are in need of updating:
In relation to your Marvell AHCI driver I've tried in vain to find an update although this is as close as I got:
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21756
However
Reading reports about your motherboard as well as users comments it seems most users end up using the Intel SATA ports (your motherboard has both Intel and Marvell SATA ports). It seems the Marvell controller isn't as fast as the Intel version and many users have had issues with it. (update drivers first before swopping ports)


The board has 8 SATA ports. The three light blue ports on the left (above) are SATA 3.0 GB/s controlled by the Z68 Express Chipset. The two gray ports are SATA 6.0 GB/s and are also controlled by the Intel Z68 express chipset. the two dark blue ports on the right at controlled by the Marvell controller and are rated SATA 6.0 GB/s. The single eSATA 3.0 GB/s port is controlled by the JMicron JMB362 controller.
Ref:
http://www.kitguru.net/components/motherboard/zardon/asus-p8z68-v-pro-gen-3-motherboard-review/2/

AiChargerPlus.sys Mon Nov 08 06:48:26 2010: ASUS Ai Charger possible BSOD cause uninstall to test.

Please run the Intel driver update utility:
https://downloadcenter.intel.com/default.aspx?lang=eng

RTKVHD64.sys Tue Nov 23 10:14:08 2010: Realtek High Definition Audio Function Driver please update:
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=8&PFid=14&Level=3&Conn=2

Post any new dump files.
 


This website is not affiliated, owned, or endorsed by Microsoft Corporation. It is a member of the Microsoft Partner Program.