Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 19, {20, fffffa801473c150, fffffa801473c170, 4020015}
*** WARNING: Unable to verify timestamp for mwac.sys
*** ERROR: Module load completed but symbols could not be loaded for mwac.sys
Probably caused by : fwpkclnt.sys ( fwpkclnt!FwpsConstructIpHeaderForTransportPacket0+20a )
Followup: MachineOwner
Hi,
the above bugcheck is usually caused by a driver and i can see in the call stack (a blow by blow account of the last sub-routines run) that mwac.sys was involved. mwac.sys is the Malwarebytes web access control driver. Un-install Malwarebytes and see if the bsod re-occurs.
I also noticed that this driver is quite old
:
RtNdPt60.sys Mon Jul 20 03:27:32 2009: Realtek NDIS User mode I/O Driver - Ethernet. I checked your motherboard support page and you do have an update for the Ethernet driver under windows 7 64bit. It's dated 2012 but thats a lot better than 2009:
Ideally your other drivers could do with updating too namely chipset and USB3 drivers. You can always try the support page, use it as a guide and google for the latest driver versions.
Post any new dump files.