hi, i have recently purchased a few new components including a mobo cpu and ram.
while playing BFBC2 i consistently get a BSOD and i have to manually shut down my pc
at first i thought it was because the computer was overheating... and boy it was... my core i5 2500 reached temps of high 90's.
but then i discovered that by default the computer overclocks itself... so i manually had to adjust it to run at a constant 3.3 GHz.
since then it is around 45c-50c at idle and 60c-65c while playing BFBC2. (70c-72c prime95)
plus, the memory also needed to be adjusted... i bought g. skill ripjaws that are suppose to operate on 6-8-6-24 and 1600MHz. the motherboard configured it to 9-9-9-28.
i even updated my bios to the F4 version.
all the manual changes i made didn't help and it still goes to a BSOD... this is the error i get when i turn on the computer -
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1037
Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8004ADA028
BCP3: 00000000BF800000
BCP4: 0000000000200001
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\090911-22682-01.dmp
C:\Windows\Temp\WER-32557-0.sysdata.xml
minidump - Link Removed due to 404 Error
(i couldn't find a place to put an attachment)
my setup is -
Core i5 2500 3.3Ghz, s1155, 6MB, GPU Core, Tray
2x2GB G.Skill Ripjaws X Edition Dual Channel CL6-8-6-24
P67A-D3-B3 s1155 Core i3/i5/i7, Intel P67, DDR3 1333, 2xPCI-E
if could help me i would be most grateful.
while playing BFBC2 i consistently get a BSOD and i have to manually shut down my pc
at first i thought it was because the computer was overheating... and boy it was... my core i5 2500 reached temps of high 90's.
but then i discovered that by default the computer overclocks itself... so i manually had to adjust it to run at a constant 3.3 GHz.
since then it is around 45c-50c at idle and 60c-65c while playing BFBC2. (70c-72c prime95)
plus, the memory also needed to be adjusted... i bought g. skill ripjaws that are suppose to operate on 6-8-6-24 and 1600MHz. the motherboard configured it to 9-9-9-28.
i even updated my bios to the F4 version.
all the manual changes i made didn't help and it still goes to a BSOD... this is the error i get when i turn on the computer -
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1037
Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8004ADA028
BCP3: 00000000BF800000
BCP4: 0000000000200001
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\090911-22682-01.dmp
C:\Windows\Temp\WER-32557-0.sysdata.xml
minidump - Link Removed due to 404 Error
(i couldn't find a place to put an attachment)
my setup is -
Core i5 2500 3.3Ghz, s1155, 6MB, GPU Core, Tray
2x2GB G.Skill Ripjaws X Edition Dual Channel CL6-8-6-24
P67A-D3-B3 s1155 Core i3/i5/i7, Intel P67, DDR3 1333, 2xPCI-E
if could help me i would be most grateful.