Navigation section
Windows 7 BSOD x5 Tonight (0xa, 0x24, 0xfe, 0x4e, 0x19)
- Thread starter Chuck W
- Start date
Solution
Elmer
Extraordinary Member
- Joined
- Mar 5, 2010
- Messages
- 3,864
Hi Chuck and Welcome to The Forum.
We really need to see the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
The .dmp files are located at C:\Windows\Minidump. Until a .dmp file is generated, the Minidump folder may not exist.
Go to your C:\Windows\Minidump folder. Copy the .dmp files to a new folder on your desktop. Zip up that folder and attach to a post.
Please see: Link Removed Following Method 2:
Download and run the SF Diagnostics Tool. Right click the SF Diag tool and select Run as Administrator before running. When the reports have been created, zip them up and attach to a post.
Download and run CPU-Z. Take screenshots**/snips of the CPU tab, Mainboard tab, Memory tab and all the slot #'s under the SPD tab.
Go to Post Reply, click on the Go Advanced button and attach the screenshots**/snips to your post for all the RAM experts to see by using the paper clip you will find on the top toolbar. Do not zip them up.
**If screenshots, please crop.
Also see: Link Removed
We really need to see the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
The .dmp files are located at C:\Windows\Minidump. Until a .dmp file is generated, the Minidump folder may not exist.
Go to your C:\Windows\Minidump folder. Copy the .dmp files to a new folder on your desktop. Zip up that folder and attach to a post.
Please see: Link Removed Following Method 2:
Download and run the SF Diagnostics Tool. Right click the SF Diag tool and select Run as Administrator before running. When the reports have been created, zip them up and attach to a post.
Download and run CPU-Z. Take screenshots**/snips of the CPU tab, Mainboard tab, Memory tab and all the slot #'s under the SPD tab.
Go to Post Reply, click on the Go Advanced button and attach the screenshots**/snips to your post for all the RAM experts to see by using the paper clip you will find on the top toolbar. Do not zip them up.
**If screenshots, please crop.
Also see: Link Removed
When attaching dmp files, PLEASE put them in a single zipped folder
Trouble
Noob Whisperer
- Joined
- Nov 30, 2009
- Messages
- 13,722
If Blue Screens persist you may want to begin by removing the two 1 Gig sticks of Samsung Memory, and populate your motherboard slots with the remain 2, 2gig stick of Corsair according to the appropriate placement in your motherboard manual.
Your current timings are a bit out of whack and your dump files are reflecting errors which could be associated with memory problems.
Re-snip you CPUz memory tab and both populated slots from the SPD tab. Include a RAMMon html report as per Link Removed and go ahead and run the SF Diagnostic Tool as well.
Regards
Randy
Your current timings are a bit out of whack and your dump files are reflecting errors which could be associated with memory problems.
Re-snip you CPUz memory tab and both populated slots from the SPD tab. Include a RAMMon html report as per Link Removed and go ahead and run the SF Diagnostic Tool as well.
Regards
Randy
