Windows 10 Network Diagnostic Information

Neemobeer

Cloud Security Engineer
Staff member
Joined
Jul 4, 2015
Messages
8,996
A simple batch file to collect network data to help troubleshoot your network issue.

  • Download the attached zip
  • Extract the .bat file
  • Rightclick the Network_Information.bat and select "Run as Administrator"
  • Upload the network_information.txt
***Update 11/02/2017*** Added more DNS test queries

***Update 10/17/2017*** Added wlan filter dump

***Update*** Added proxy settings and more DNS tests

***Update 12/1/2016*** Fixed typo in script

***Update 12/2/2016*** Added better formatting, time stamp, log file override, and network adapter status and error codes
 

Attachments

Last edited:
Solution
SSE2 is a CPU instruction set. Firefox may need it to function as may other browsers. You may be better off installing a copy of Linux such as Linux Mint. That way you'd at least have a supported OS as well as get better performance on the older hardware.
Sort by date Sort by votes
I noticed you say you made the cables. I would put it on a tester then or buy some premade online.
 
Upvote 0 Downvote
A cable following the T-568B standard is a crossed cable. Some computers auto detect and correct it, but not all.
I think you should use the T-568A standard.
 
Upvote 0 Downvote
If it's going computer to a router a B cable would be correct. If it were to a switch it would be an A cable. Most devices today can detect and switch the Tx Rx logic
 
Upvote 0 Downvote
I have some updates. The cable works on Windows XP with Atheros AR8121 PCI-E network card.
In windows 7, with Realtek RTL8101 PCI-E network adapter, doesn't work and have exactly the same behavior with Windows 10 running a Realtek chip using PCI-e. (seems like the cable isn't connected properly, keep trying to identify connection). Also checked with another windows10 machine with the same results.

All drivers are updated and are the latest available. The other end of the cable is connected to a router/modem of ZTE (ZXHN H108N V2.3) running modulation ADSL2+
 
Upvote 0 Downvote
With some further digging, it seems the cable is bad quality.
When I changed Speed&Dublex down to 10Mbps it worked. I suppose XP use low-speed connection by default since its an old OS.

Thanks everyone for your valuable help, especially Neemobeer.
Best regards.
 
Upvote 0 Downvote
I'm having a networking problem. I'd like to post the Network Info file but I use a Hosts File to block websites. It comes out a really big file. Would that be Ok to post or should I deal with all of the Hosts entries first.
 
Upvote 0 Downvote
HI
Neemobeer
wy
Would you tell the nose why this Network_Info.zip is working on the printer not on the screen to select the print.
PERHAPS I wrong how would i see that it is not hiding as a result THANK YOU,
Network_Info.zip
 
Last edited:
Upvote 0 Downvote
I'm not really sure what you're asking. The zip file contains a batch script that collects various network related information for troubleshooting network issues.
 
Upvote 0 Downvote
Hello Network_Info.zip
Hi i did: Network_Info.zip after that made i search where is the result not showing txt.? thank you Rapaaja
 

Attachments

  • Skannaus_20190710 (2).webp
    133.6 KB · Views: 264
Last edited:
Upvote 0 Downvote
The results should be on the desktop. For better results right click the script and "Run As Administrator"
 
Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

C
  • Solved
Windows 7 Network Diagnostic Policy Not Running?
Replies
2
Views
1K
BIGBEARJEDI
  • Solved
Windows 7 Real Network Diagnostic Utility for Win 7
Replies
8
Views
6K
Computer Ed
M
  • Solved
Windows 7 W7 Ultimate 64-bit definite issue networking with Mac OS X - detailed diagnostic information provide
Replies
1
Views
3K
ChatGPT
D
  • Solved
Windows 7 Network Diagnostic Problem
Replies
1
Views
7K
Jimbo22
  • Solved
Windows 7 Windows Network Diagnostics tool error
2
Replies
25
Views
46K
rainsweep
R