Daveinternets
New Member
- Joined
- Aug 2, 2010
So, got a new OCZ Vertex 2 120 GB over the weekend. Installed it, everything went fine. Blew away my old install (backed things up of course), loaded raid drivers during install. Formatted both, installed on SSD with my D drive as Games/Music/Etc.
Now everything seemed fine on first boot. Installed everything again, most of everything going my Raid0 drive(s). Worked great.
Boot it up Sunday, my Raid 0 drives are write protected. Odd, so I use diskpart and clear the read only. Works great again. Boot it up Sunday evening. Same thing. Diskpart it again. Cycle repeated again today.
Using the JMicron controller on my EVga X58 Mobo. Have 2 300 GB VRaptors in Raid 0 that work great after using the diskpart command.
Is there some setting I am missing somewhere? Why are they reverting to read only after a reboot? My external 1.5 TB USB 2.0 drive is fine, been able to read/write perfectly throughout.
I'm at work now, so I can't get real specific specs, but if there is any further info needed, let me know and I'll try my best to provide details.
Now everything seemed fine on first boot. Installed everything again, most of everything going my Raid0 drive(s). Worked great.
Boot it up Sunday, my Raid 0 drives are write protected. Odd, so I use diskpart and clear the read only. Works great again. Boot it up Sunday evening. Same thing. Diskpart it again. Cycle repeated again today.
Using the JMicron controller on my EVga X58 Mobo. Have 2 300 GB VRaptors in Raid 0 that work great after using the diskpart command.
Is there some setting I am missing somewhere? Why are they reverting to read only after a reboot? My external 1.5 TB USB 2.0 drive is fine, been able to read/write perfectly throughout.
I'm at work now, so I can't get real specific specs, but if there is any further info needed, let me know and I'll try my best to provide details.