Windows 7 New System Build- Mini-dumps attached

mccartm6 · May 20, 2011

Ok guys,

I've been attempting to fix this for 2 weeks. Everything on this build is brand new.

I've attached a system spec, the mini dumps. Id really appreciate advice on this as I've been into the bowels of Windows 7 following threads from across the internet and I've been unable to fix it.

View attachment Minidump.zip View attachment System Details.txt

Much appreciated
Martin

Saltgrass · May 20, 2011

I am not the expert here, but you seem to have UltraISO installed and one of the drivers is from 2007. Are you using the latest version? This may not be the cause of your problems, but you might check for an update, or remove the program to test.

C:\Program Files (x86)\UltraISO\drivers\ISODrv64.sys
Image name: ISODrv64.sys
Timestamp: Fri Apr 13 04:42:40 2007 (461F5090)

mccartm6 · May 21, 2011

Okay so I upgraded ultraiso and did another memtest86 4passes it found nothing.. any other suggestions?

kaos · May 21, 2011

ok lets look what we have here for you

MINIDUMPS

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800fff2028, be200000, 5110a}

Probably caused by : hardware

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800fff2028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be200000, High order 32-bits of the MCi_STATUS value.
Arg4: 000000000005110a, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------


BUGCHECK_STR:  0x124_GenuineIntel

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

PROCESS_NAME:  System

CURRENT_IRQL:  f

STACK_TEXT:  
fffff800`00ba8a98 fffff800`03402903 : 00000000`00000124 00000000`00000000 fffffa80`0fff2028 00000000`be200000 : nt!KeBugCheckEx
fffff800`00ba8aa0 fffff800`02f9a493 : 00000000`00000001 fffffa80`0db44a60 00000000`00000000 fffffa80`0db44ab0 : hal!HalBugCheckSystem+0x1e3
fffff800`00ba8ae0 fffff800`034025c8 : 00000000`00000728 fffffa80`0db44a60 fffff800`00ba8e70 fffff800`00ba8e00 : nt!WheaReportHwError+0x263
fffff800`00ba8b40 fffff800`03401f1a : fffffa80`0db44a60 fffff800`00ba8e70 fffffa80`0db44a60 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff800`00ba8c90 fffff800`03401dd5 : 00000000`00000008 00000000`00000001 fffff800`00ba8ef0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff800`00ba8cd0 fffff800`033f5e88 : 00000005`0189dcd1 fffff800`03001e68 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff800`00ba8d00 fffff800`02e82fac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff800`00ba8d30 fffff800`02e82e13 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c
fffff800`00ba8e70 fffff800`02e90485 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153
fffff800`00b9cbf0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiTimerExpiration+0x175


STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: hardware

IMAGE_NAME:  hardware

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_VRF_PROCESSOR_CACHE

BUCKET_ID:  X64_0x124_GenuineIntel_VRF_PROCESSOR_CACHE

Followup: MachineOwner
---------

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {3914bdb3, d, 0, fffff80002edd5fc}

Unable to load image \SystemRoot\system32\DRIVERS\intelppm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for intelppm.sys
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys
Probably caused by : intelppm.sys ( intelppm+39c2 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 000000003914bdb3, memory referenced
Arg2: 000000000000000d, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002edd5fc, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800031080e0
000000003914bdb3 

CURRENT_IRQL:  d

FAULTING_IP: 
nt!KeUpdateRunTime+9c
fffff800`02edd5fc 450fb6842470010000 movzx r8d,byte ptr [r12+170h]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

BUGCHECK_STR:  0xA

PROCESS_NAME:  System

TRAP_FRAME:  fffff88002f1b900 -- (.trap 0xfffff88002f1b900)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000006a7bc4eb02
rdx=0000000000001a60 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002edd5fc rsp=fffff88002f1ba90 rbp=0000000000000000
r8=00000000002cbbd3  r9=00000000002cbbd3 r10=0000000000000c97
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
nt!KeUpdateRunTime+0x9c:
fffff800`02edd5fc 450fb6842470010000 movzx r8d,byte ptr [r12+170h] ds:3000:00000000`00000170=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002ecfc69 to fffff80002ed0700

STACK_TEXT:  
fffff880`02f1b7b8 fffff800`02ecfc69 : 00000000`0000000a 00000000`3914bdb3 00000000`0000000d 00000000`00000000 : nt!KeBugCheckEx
fffff880`02f1b7c0 fffff800`02ece8e0 : 00000000`00000000 fffff880`009e9180 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`02f1b900 fffff800`02edd5fc : fffff800`03187000 00000000`00000000 00000000`00002711 fffffa80`0dbe9400 : nt!KiPageFault+0x260
fffff880`02f1ba90 fffff800`02edd3a1 : 00000000`00000000 fffff880`02f1bb40 fffff880`009e9180 00000000`00000001 : nt!KeUpdateRunTime+0x9c
fffff880`02f1bac0 fffff880`049529c2 : fffff800`02ede24a 00000000`00312cce fffffa80`0dbe94b8 fffff880`009f40c0 : nt!KiSecondaryClockInterrupt+0x131
fffff880`02f1bc58 fffff800`02ede24a : 00000000`00312cce fffffa80`0dbe94b8 fffff880`009f40c0 00000000`00000001 : intelppm+0x39c2
fffff880`02f1bc60 fffff800`02ed8ebc : fffff880`009e9180 fffff880`00000000 00000000`00000000 fffff800`02f89130 : nt!PoIdle+0x53a
fffff880`02f1bd40 00000000`00000000 : fffff880`02f1c000 fffff880`02f16000 fffff880`02f1bd00 00000000`00000000 : nt!KiIdleLoop+0x2c


STACK_COMMAND:  kb

FOLLOWUP_IP: 
intelppm+39c2
fffff880`049529c2 ??              ???

SYMBOL_STACK_INDEX:  5

SYMBOL_NAME:  intelppm+39c2

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: intelppm

IMAGE_NAME:  intelppm.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4a5bc0fd

FAILURE_BUCKET_ID:  X64_0xA_VRF_intelppm+39c2

BUCKET_ID:  X64_0xA_VRF_intelppm+39c2

Followup: MachineOwner
---------

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800f728028, be200000, 5110a}

Probably caused by : hardware

Followup: MachineOwner
---------

0: kd> !anaylze -v
No export anaylze found
0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800f728028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be200000, High order 32-bits of the MCi_STATUS value.
Arg4: 000000000005110a, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------


BUGCHECK_STR:  0x124_GenuineIntel

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  f

STACK_TEXT:  
fffff800`00ba8a98 fffff800`02e1f903 : 00000000`00000124 00000000`00000000 fffffa80`0f728028 00000000`be200000 : nt!KeBugCheckEx
fffff800`00ba8aa0 fffff800`02fdc493 : 00000000`00000001 fffffa80`0f069ea0 00000000`00000000 fffffa80`0f069ef0 : hal!HalBugCheckSystem+0x1e3
fffff800`00ba8ae0 fffff800`02e1f5c8 : 00000000`00000728 fffffa80`0f069ea0 fffff800`00ba8e70 fffff800`00ba8e00 : nt!WheaReportHwError+0x263
fffff800`00ba8b40 fffff800`02e1ef1a : fffffa80`0f069ea0 fffff800`00ba8e70 fffffa80`0f069ea0 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff800`00ba8c90 fffff800`02e1edd5 : 00000000`00000008 00000000`00000001 fffff800`00ba8ef0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff800`00ba8cd0 fffff800`02e12e88 : fffff800`03040e80 fffff800`03040e80 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff800`00ba8d00 fffff800`02ec4fac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff800`00ba8d30 fffff800`02ec4e13 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c
fffff800`00ba8e70 fffff800`02ecb1a2 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153
fffff800`00b9c520 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDeferredReadyThread+0x2c2


STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: hardware

IMAGE_NAME:  hardware

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_CACHE

BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_CACHE

Followup: MachineOwner
---------

kaos · May 21, 2011

ok start your pc up

hold F8 as soon as it loads

select SAFE MODE WITH COMMAND PROMT

the pc then will load

when the black box comes up

type

verifier /reset

press enter

restart ya pc n let me no how it goes..... u might be a happy person

Windows 7 New System Build- Mini-dumps attached

mccartm6

New Member

Saltgrass

Excellent Member

mccartm6

New Member

kaos

Senior Member

kaos

Senior Member

Similar threads