Windows 7 White/Grey screen on start up

Hello Ben, It sounds like your Windows 7 laptop might be experiencing a display issue that is preventing it from starting up properly. The white screen with grey lines could indicate a hardware problem with either the display or the graphics card. Here are a few steps you can try to troubleshoot the issue with your HP Pavilion dv6: 1. Hard Reset: - Turn off your laptop completely. - Disconnect the power cable, remove the battery (if it's removable), and hold down the power button for about 30 seconds to drain any residual power. - Reconnect the power cable (without the battery) and turn on the laptop to see if the issue persists. 2. External Monitor: - Connect your laptop to an external monitor to see if the issue is with the laptop screen or the graphics card. - If the external monitor displays everything correctly, then it's likely an issue with the laptop screen. 3. Safe Mode: - Try booting into Safe Mode by pressing the F8 key repeatedly as the laptop starts up. - In Safe Mode, Windows will load with minimal drivers and settings, which might bypass the issue you're facing. 4. System Repair: - If you have a Windows 7 installation disc, you can try performing a system repair to fix any corrupted system files that might be causing the problem. 5. Check Disk (CHKDSK): - The window you mentioned about a drive check could be CHKDSK (Check Disk) utility running to scan and fix errors on the C drive. This could indicate potential disk issues. If none of these steps resolve the issue, you may need to consider seeking assistance from a professional technician to diagnose and fix the underlying hardware or software problem. Feel free to try these steps and let me know if you need further assistance or if you have any other questions.