Back Story: I had an issue in the past were my computer would restart overnight (I assume it crashed) and upon trying to start up the computer it would not load Windows 7(W7) most of the time. To get it to load I would have to shut the computer down and leave it off for a while and then it would start up. After starting it up I would run SeaTools, a program by Seagate for Seagate's hard drive (which I am using) and the check process would finish without issue. However during a previous crash I was greeted by a Virus Warning from Antivir saying that it detected a string from a virus Whistler.dx(not the exact spelling) which turns out to be a BOOT Virus. I ran Antivir to clean the virus and it said it was successful as the virus was no longer detected during the second scan. Two days later the computer had crashed again but this time it was different, before W7 even started loading the screen came up with the Boot Manager having the Error Code: 0xc000000e and requesting that I use the Windows Install Disk to repair.
I have tried a few things so far and will explain what I have experienced so far and give technical specs.
Currently I have 3 internal hard drives and 4 external USB hard drives pluged into the computer. Two of the internal hard drives are in Raid0(A:\,B:\, SATA) with the OS installed on them and currently the ones that are failing to boot. The third internal(C:\, ATA) was there but not used, until now, I have installed W7 on this third hard drive(C:\, ATA) so I have a working computer. Upon start with (C:\, ATA) the external USB hard drive(D:\, USB) was no longer recognized marked as Unallocated and does not show up in explored but does show up in device manger this hard drive contained my back up of the (A:\,B:\, SATA) which are also marked as Unallocated Drives. I do not know if the change from SATA to ATA would have caused this.
So as it stands my Raid0(A:\,B:\, SATA) will not boot with the Error Code: 0xc000000e and my back up (D:\, USB) is now and Unallocated drive.Upon start up it will still go to the Boot Manager Screen asking which installation of W7 I want to boot, only the (C:\, ATA) will boot.
What I have done so far;
I have tried the Start Up Repair using the install disk, gave the results:
OS | Size | Location
W7 0MB Unknown Location
Event StartupRepairOffline
P.S. 01 6.1.7600.16385
02 6.1.7600.16385
03 Unkown
04 -1
05 External
06 1
07 CorruptBootConfigData
I have downloaded EaseUS Data Recovery Wizard and I am about to use it to attempt to get the data off the disk, but before I do I wanted to get some input as to if this problem is fixable.
Here is a screen shot for more info and if there is anymore info that would be helpful let me know. http://i.imgur.com/G0t1R5b.png?1
I have tried a few things so far and will explain what I have experienced so far and give technical specs.
Currently I have 3 internal hard drives and 4 external USB hard drives pluged into the computer. Two of the internal hard drives are in Raid0(A:\,B:\, SATA) with the OS installed on them and currently the ones that are failing to boot. The third internal(C:\, ATA) was there but not used, until now, I have installed W7 on this third hard drive(C:\, ATA) so I have a working computer. Upon start with (C:\, ATA) the external USB hard drive(D:\, USB) was no longer recognized marked as Unallocated and does not show up in explored but does show up in device manger this hard drive contained my back up of the (A:\,B:\, SATA) which are also marked as Unallocated Drives. I do not know if the change from SATA to ATA would have caused this.
So as it stands my Raid0(A:\,B:\, SATA) will not boot with the Error Code: 0xc000000e and my back up (D:\, USB) is now and Unallocated drive.Upon start up it will still go to the Boot Manager Screen asking which installation of W7 I want to boot, only the (C:\, ATA) will boot.
What I have done so far;
I have tried the Start Up Repair using the install disk, gave the results:
OS | Size | Location
W7 0MB Unknown Location
Event StartupRepairOffline
P.S. 01 6.1.7600.16385
02 6.1.7600.16385
03 Unkown
04 -1
05 External
06 1
07 CorruptBootConfigData
I have downloaded EaseUS Data Recovery Wizard and I am about to use it to attempt to get the data off the disk, but before I do I wanted to get some input as to if this problem is fixable.
Here is a screen shot for more info and if there is anymore info that would be helpful let me know. http://i.imgur.com/G0t1R5b.png?1
Last edited: