- Thread Author
- #1
A week ago i had to change my CPU cooler as it was failing & allowed my CPU to overheat which i found out after a few random reboots & touching the Heatsink on my CPU cooler to find out it was almost to hot to touch. Since then i have been getting random system lockups which i cant explain or find the cause.
I did a memtest on my memory to find 1 or 2 faults on 2 sticks & im currently left with 2 of my newer sticks which i am yet to fully test. However at random points my system freeze's up. It dont reboot just locks up completely. Sometimes when i turn the system on the system locks up just before it gets passed the asus gate logo or when the Windows 7 logo appears it freezes. Just 5 minutes ago i was typing this out for the first time & my picture went distorted & froze & it took 3 or 4 resets & power on/offs to get the system to boot up.
I dont know if its my GPU, memory or god forbid CPU damage from the overheating which i suspect that might be the case as when i reset my comp from a freeze, i get Unleashing mode failed to initialize & when i go into cmos to see whats wrong it locks up on me again.
Ive ran the prog that collects the data & attached in the zip file as requested. Hope someone can figure out the problem because i cant afford to buy all 3 if its just going to be 1 part of the hardware thats at fault.
Thanks
I did a memtest on my memory to find 1 or 2 faults on 2 sticks & im currently left with 2 of my newer sticks which i am yet to fully test. However at random points my system freeze's up. It dont reboot just locks up completely. Sometimes when i turn the system on the system locks up just before it gets passed the asus gate logo or when the Windows 7 logo appears it freezes. Just 5 minutes ago i was typing this out for the first time & my picture went distorted & froze & it took 3 or 4 resets & power on/offs to get the system to boot up.
I dont know if its my GPU, memory or god forbid CPU damage from the overheating which i suspect that might be the case as when i reset my comp from a freeze, i get Unleashing mode failed to initialize & when i go into cmos to see whats wrong it locks up on me again.
Ive ran the prog that collects the data & attached in the zip file as requested. Hope someone can figure out the problem because i cant afford to buy all 3 if its just going to be 1 part of the hardware thats at fault.
Thanks
