📎 AI Summary:
The original poster plans to reinstall Windows 7-64 on two HDDs configured in RAID 0 and is uncertain whether to use Intel RST drivers version 11 or 12, asking for guidance on which is appropriate and how to load them during installation. A respondent suggests either driver should work if a proper "F6 floppy" version is used, clarifying that a USB flash drive can be employed during setup, but notes that more system-specific details are needed for precise advice. Overall, the discussion centers on selecting the correct RAID drivers for a smooth Windows reinstall with RAID configuration.
D

donbailey

New Member
Joined
Oct 22, 2009
Messages
48
Thread Author #1
I am getting ready to re-install Win7-64 to my two HDD's that are in RAID 0. I have done this one time before, but recall that the drivers can be confusing. There are some Intel RST drivers on the Asus website, version 11.something and on the Intel site there are version 12.something.
Which drivers should I use, if any, for my raid boot drives? Assume I add them using a USB stick during Win install, correct?
 

Solution
Saltgrass
I would say either driver will work, but you need an "F6 floppy" version to make accessible during boot, and yes a flash drive can be used. Since you have given no information about which drivers your are referring to, or what type of system you have, it is hard to advise in more detail.
Sort by date Sort by votes
Saltgrass

Saltgrass

Excellent Member
Microsoft Community Contributor
Joined
Oct 16, 2009
Messages
15,152
#2
I would say either driver will work, but you need an "F6 floppy" version to make accessible during boot, and yes a flash drive can be used. Since you have given no information about which drivers your are referring to, or what type of system you have, it is hard to advise in more detail.
 

Upvote 1 Downvote
Solution
You must log in or register to reply here.