Alright, so some background nformation to start off with. I was just recently forced into updating to windows 8.1. Now, I've been having wifi connection issues since the beginning of the year, but it seems to have taken off exponentially since the update.
I'm currently using my college's wifi...
adapters
college wifi
connection issues
connectivity
desktop
dns
drivers
gateway
internet access
ip address
network
problem solving
restarts
stability
tech support
troubleshooting
usb adapter
vpn
wifi
windows 8.1
Ok so I know most of you will probably say there are a million other discussions and fixes out there for this issue, but none have worked for me this far. When I try to run windows network diagnostics I get a "local area connection doesn't have a valid IP configuration" I've tried resetting the...
hello, I have been having this issue for few days already that I noticed..
I have called my isp and everything no one can provide me resolve this I feel hopeless... I am using windows 8.1 64 bit pro, and the problem is also when I run Tracert to any Ip I get always this 0.0.0.0 address first...
Good day, all
I'm new here, and this is my 1st post.
What brings me here, is that the Start menu's Help and Support is not functioning. The same can be said, when I attempt to use the toolbar's Help/View Help. The F1 key is useless, as well.
I can't figure out what happened to the...
64-bit
adobe dreamweaver
disk space
f1 key
functionality
gateway
help and support
home edition
laptop
malware
ram
recovery discs
sfc scan
software issue
system restore
tech support
troubleshooting
user forum
user help
windows 7
Hello, first off im new here so nice to meet everyone. I did a factory reset on my gateway
all in one computer (Model is ZX6970) a while back and everything was going good and I got a message that seems pretty common from my research. it says "Windows could not complete the installation. To...
Hello I have a Gateway. Model No. MS2285 AMD Anthon 2 X2 M300 thats runs off windows 7. When I try to use a browser it shows the error "dns probe finished no internet". I tried turning off the firewall, idk what to do. I get wifi from my friends internet. I can browse with my phone using the...
Hello everybody.
I have a problem about IP-Forwarding.
I set the registry value of "IpEnableRouter" but IP-Forwarding does not work.
I tested it by vmware in this scenario:
I have a win7 Guest OS, win7 Host OS & a modem. I enabled registry value of "IpEnableRouter" in Host OS & set the default...
I get this error message when I start up my
computer.
It's a Gateway Laptop model NE56R34u and it originally came with Windows 8 but I had a friend wipe that and install Windows 7. I did this because its for my mom and I thought 8 was going to be a little tough for her. So now it has...
we are connected to the router but its say it connected with "limited access" below is our ipconfig /all
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\XD450 User>ipconfig /all
Windows IP Configuration
Host Name . . . . . . ...
connection
dhcp
drivers
gateway
home networking
ip configuration
ipv4
limited access
netgear
network issues
networking
subnet mask
technical support
troubleshooting
usb adapter
windows 7
wireless
After upgrading(?) to Windows 8.1, I now have more partitions on my hard drive. Can anyone tell me which ones are needed? The upgrade has caused other problems, mainly that I can't use my Microsoft Office Click-to-Run USB.
I have a Gateway DX 4870 that came with Windows 8, and a Gateway...
Hello
I just installed Chrome and under advanced settings it says it is using my computer's proxy setting to connect to the internet. I have a gateway and a private network.
is this setting they advise me about(proxy) correct?
Thank you
Peter
I am running a Gateway desktop with Windows 7 Premium 64bit. I have been trying to install sp1 but I keep getting errors (0x8007371b) I went to all the self help files and it wanted me to do an update of windows update. I also ran the microsoft fixit tool. Still nothing. I even went to the...
64-bit
avast
download center
error codes
fixit tool
gateway
installation issues
microsoft
remote access
self help
sp1
system readiness
tech support
troubleshooting
update
windows 7
I am trying to make a direct connection to a XP machine using a cable. No switch or router involved. Can it be done? There are 3 cables joined by fem/fem connectors and one of the cables is a crossover. In my mind as long as there is a crossover in the mix then the transmit + and - are...
I apologize if this post isn't categorized correctly but it's my first time posting on well any forum for that matter. Recently on my 2 year old Gateway FX6860, an issue occurred where after installing anti virus software, said software caused my computer to be unable to boot up, safe mode would...
antivirus
backup
boot issues
cd installation
computer advice
error messages
factory reset
gateway
help
operating system
pc maintenance
preloader issue
repair
restoration
software problems
system restore
technical support
troubleshooting
user data
windows issues
Hello, and thanks for noticing my thread.
The symptoms of my computer are as listed:
I have experienced a BSOD pertaining to MEMORY_MANAGEMENT (I don't really know what this means?)
I have examined a thread on this forum,
Link Removed
in the hopes of finding a solution to my ever-worsening...
I have this Gateway P-7811FX that had Vista on it. I was trying to do a factory restore before I install Windos 7 when it began asking me for a HDD password. Google search told me I'd have to send the laptop to Gateway to get that unlocked... for a fee.
So I ordered a new hard drive and want...
A variation on similar problems others have had.
I have had my network running for a couple years without problems. I'm using Comcast Business Class broadband with a static IP and a Linksys E3000 router for a home business network. Four wired computers and the rest are wireless for a total of...
Hello, I recently got a new hard drive for my pc after my last one died one me and after 2 days I am now getting random crashes. Sometimes it shows the BSOD and gives me the error message 0X0000000A (0X00000000, 0X00000002, 0X00000001, [0x00000000]). Not too sure about the part in [] because I...
Ok, to start this off I'm going to provide some backstory into my problem. This is from a thread I created here about a month ago.
Ok, so for a brief overview, every user account on my home computer has internet access but mine.
I have Windows 7 (64 bit), my computer is a gateway, and I use...
antivirus
blue screen
ccleaner
computer restart
crash
display driver
driver issues
gateway
graphics card
hardware check
internet access
internet explorer
profile issues
system recovery
technical support
troubleshooting
user account
windows 7
youtube
zonealarm
The only thing that repairs the broken connection is ipconfig /release & ipconfig /renew that I now need to do every 5mins. Have tried updating drivers, restarting power of both pc and router, setting the dns on automatic and setting it on openDNS... still getting the same message.
The...