I recently upgraded to Windows 7 and I went out earlier and bought a Linksys Wireless N (WRT120N) router. Hooked it all up, no problem - installed routers a billion times before. Once the wireless network was setup, I plugged my laptop in using a cable and the internet worked fine (still does)...
I am connected to the wireless modem in my laptop, but it says there is no internet access.
I have full signal strength but no internet. Ethernet and wireless both are not working.
I tried to renew IP address in comand promt and I received following results.
Windows IP Configuration
An...
access
configuration
connection
dns
error
ethernet
gateway
internet
ip address
ipv4
ipv6
local area network
loopback
modem
networking
signal
teredo
troubleshooting
windows 7
wireless
Ok first off how good is windows7:D Installed and running fine for a week as my primary OS.
I'm a bit stumped, ever since installing it I've noticed the throughput on my home network isn't as good like it was with vista:eek: Odd I know because well know what that was like.
I've disable...
I have a desktop and laptop running Windows 7 64 bit Home Premium.
The Desktop is connected via cable and my Laptop is connected to my network via wireless.
I can connect to the internet no problem from both. I am able to "Create a HomeGroup" on both my Desktop and Laptop. The issue I...
Hello i have installed windows 7 64-bit and, although i am not certain, i think i had good internet speed before i put the 64-bit version. Initially i decided not to use the 64-bit version because i couldnt get the driver of my external USB wi-fi card to be recognized.
It's an SMC WUSB-G EZ...
netgear WNR2000 V1 :
i get limited access the yellow triangle when hooking up my router. i can access the router page, but nothing else. when i hook up straight cable , it works...
things ive tryed :
uncheck ipv6
disable homegroup / stopped services.
upgraded firmware
it...
I have installed Windows 7 on my PC and laptop.
One problem I have though is that I have created a Homegroup on my PC, I have a password and all seems fine, but on the laptop it does not recognise that there is a Homegroup on the network.
If I try to create a Homegroup on the laptop I get the...
Hello, I just upgraded from Vista, which in itself was easy. Now the only functioning internet browser is IE. Neither Firefox nor Chrome will work, and I notice as well the IPv6 is not connected.
My firewall settings are fine.
Hi all,
I have a seemingly simple problem to which I have yet to find an answer.
In a nutshell, since I installed Windows 7 Ultimate 64-bits (on a previously XP-ran pc) I cannot get a bloody internet connection !
Here are the PC specs :
AMD Athlon 64 3800+ (2,41 Ghz)
Nvidia Geforce 6100...
Network Connection Tips
I have been with Windows 7 for a few weeks now and I notice a lot of network issues. I have a Motorola SBG900 Router that would reboot everytime I would come out of sleep mode or restart my computer and intermittent network issues. I have learned a few quick fixes, First...
OK,
I have got my Dlin 1260 connected to my printer. I did this by taking problem PC into other room and hard wire to network to communicate with router to install printer.
Now here is the problems
When wired to my inteernet connection all is fine.
When wired to dlink, and dlink wireless...
antivirus
browser
connection
dhcp
dlink
error
firefox
firewall
home page
internet
internet explorer
ip address
ipv6
links
network
printer
router
troubleshooting
windows 7
wireless
I have the same problem on Win7 RC beta. After I reinstall the new Windows 7 when I got it recently, hoping it would go away. But it still showing the same problem.
I have reinstalled the device driver - Nvidia nForce Networking Controller
I have updated the firmware on the Dlink router -...
I use this as a wireless printer point and a wireless internet connection for a PC. All worked fine with XP but wont work with WIN 7 32 Premium.
Problems:Other PC can communicated with printer. But PC connected to router cannot. It might if I could download printer drivers. PC connected to...
browser
connectivity
dd-wrt
dlink
drivers
home network
internet
ip address
ipv6
network
ping
printer
reset
router
settings
support
troubleshooting
windows 7
wireless
I use this as a wireless printer point and a wireless internet connection for a PC. All worked fine with XP but wont work with WIN 7 32 Premium.
Problems:Other PC can communicated with printer. But PC connected to router cannot. It might if I could download printer drivers. PC connected to...
I read at a lot of forums that have the same problem.
my download speed is around 70/80 kb/s instead of 350 kb/s and also at at speedtest it's crappy but only the download speed is like that upload speed working. http://www.speedtest.net/result/587176284.png
I'm supposed to have 2.5 mb/s and I...
Hi all , new here and i was hoping you can help me with this FRUSTRATING win 7 error.
Like all posts my error is the known Unidentified Network .. heres the thing.
Ive been using Win 7 for bout 2 months now or something like that , no problems at all.. Yesterday i changed my Modem from a...
Ok so I got my new internet installed yesterday. Its 13mbps cable with a static IP. The problem is I have 4 computers "2 laptops, desktop and server" running through a WRT56gs router. All machines run great but the Vista premium desktop dose not. If I goto a web page it takes forever "looking...
bandwidth
cable
computers
connectivity
desktop
home network
internet
ipv6
isp
laptops
network
performance
router
setup
slow
static ip
troubleshooting
vista
web pages
wrt56gs
hello guys.. i am running windows 7. and for some reason i cannot tether from my iphone. When i connect my iphone via usb and i turn on tethering.. I go to network adapter and i see a new network called LOCAL AREA CONNECTION 3 which is apple movile device ethernet#2. But when i check the...
Hi,
I previously used an XP computer on the domain wth a name like 'mylaptop'.
I replaced the drive and have Windows 7 Ultimate installed and am unable to join the computer 'mylaptop' to the domain. I've done these things...
1. Ran NSLOOKUP to verify I can see the domain controller
2...