nic

  1. T

    Windows 10 installation

    I have an ASUS laptop with a crippled hard drive. I was planning on cloning the hard drive to a new hard drive and then removing and replacing the hard drives. The problem is that I cannot install any new applications to the hard drive and so my plan to install the software on the existing hard...
  2. J

    Slow data copy between iscsi drives

    Hi All, I have a windows 2012 r2 server with iscsi drives configured. Server is experiencing slowness during data copy between iscsi drives after server reboot . In order to fix the issue , I need to disable and enable iscsi configured NIC card after server reboot . It looks server is not able...
  3. Y

    Windows Server 2019 Server Manager has bugus 169.254 address

    Server manager shows 2 addresses; 192.16.1.x and 169.254.x.x. The first is the valid address, the second I assume is because I always clean install all Windows with the network disconnected. The motherboard, and X299 XPower Gaming AC motherboard has 2 onboard NICS. But I have a 10G PCIe adapter...
  4. olat

    Windows 10 Ethernet only works after reboot (every other time)

    Hello! I was having some trouble with my built-in NIC where internet would disconnect randomly, so I went and purchased a dedicated network card. This card does not have the same issue, my connection is stable and does not drop, but it does not work at all the first time I turn on my PC. In...
  5. kd8tzc

    Win 10 x64 Gigabit network card?

    I have a home built PC that has an integrated NVIDIA network card (geforce 5 series I believe) that has been throwing all kinds of BSOD's since January (right after one of the Windows updates). Anyhow, I grew frustrated trying to find a driver for this NIC that would work, and I'm just looking...
  6. arya6000

    Windows 10 Disable one NIC for Windows 10 user and leave another enabled?

    Is it possible to create a user in Windows 10 who has permission to install/uninstall programs, but does not have permission to enable one of the NICs on the system? I want one of the NICs to remain enabled, but remove permission from him for one of the NICs
  7. ThomasBW

    Windows 10 Ethernet not regcognized after window 10 upgrade

    After upgrading my Dell XPS 8700 from Windows 8.1 to 10, the Ethernet stopped working. It's not found in device manager, so the uninstall/reinstall of the driver did nothing. It gave me the "The Realtek Network Controller was not found. if deep sleep mode is enabled please plug the cable." I've...
  8. A

    Win Server 2008 R2 setup problems

    I have recently upgraded our office network with a Win server and switched from a workgroup bases LAN to a domain; However, I have run into a few issues that I still can't overcome: 1. the shared drive on the server, and the server itself are not visible on the network after I switched routers...
  9. A

    Windows 8 Help : Unable to find Static IP address in network adapter once assigned to NIC

    Hi All, I am using Windows 8.1 in my Asus Netbook. I am facing one issue since last few days. I have assigned static IP address 11.1.1.15 255.255.255.0 to Ethernet adapter in network connection. When i save my settings and exit from network connection i am able to see this IP address in...
  10. Rao

    Windows 8 Ethernet

    Dear All, When I install Win 8.1 64bit on mainboard with chip lan 8111E. It works OK and then remove HDD and re-install it to other mainboard with chiplan 8111G. At this time, I check Nic lan and it shows "realtek PCIe GBE Family controller #" . This is not the same realtek PCIe GBE Family...
  11. MissMaria

    Windows 8 Windows 8 dual boot

    W7 and w8 are both installed but in different partition. The w8 doesn't detect my LAN. No light on NIC. tried downloading driver from msi website. Disabling enabling didn't work too. Changed duplex to 100mbps full still nothing. Disabled fast start nothing. But no problem on w7. Any thoughts?
  12. MissMaria

    Windows 8 Windows 8 cable unplugged

    I did a dual boot w7 and 8. Installed 8 on new partition. Installed the drivers from my msi cd. Just like what i did on my 7. When i log in it says cable unplugged. No light on nic. Cant detect. I uninstalled and reinstalled lan driver, changed duplex to 100 mbps full and nothing. When i go to 7...
  13. I

    Windows 8 After W8.1 upgrade, wired network sometimes says 'cable disconnected'

    Start on the first boot to the desktop after the upgrade to W8.1. It reported it could NOT connect to a network. Once I got to the desktop I opened the NETWORK AND SHARING CENTER and DISABLED and ENABLED my NIC. That made the connection. All was OK for a boot or two after that. However, on a...
  14. How to Update Realtek Network Interface Card Drivers (PCIe GBIE Family Controller)

    How to Update Realtek Network Interface Card Drivers (PCIe GBIE Family Controller)

    Easily update Network Interface Card Drivers from Realtek: Network interface card drivers are often left neglected on many systems. Yet the updates that are brought forth can be beneficial to resolve connectivity problems on LANs and WANs. This video tutorial demonstrates how to acquire...
  15. N

    Windows 7 Strange Win7 DHCP issue take a look!...please

    Hello all, I've got a bit of a strange issue going on with a PC i just put together. Its a Win7 Home Premium machine will all updates and service packs installed. There is no antivirus software or security software or 3rd party firewall software installed...machine is clean though only play...
  16. mjutras

    Windows 7 Network Limited Connection

    I have a laptop with the network unable to connect to outside the LAN.I can ping anything on my network, my network can ping my laptop but laptop cannot ping 8.8.8.8 or anything outside. I have the same issue with the wireless and NIC, showing limited connection. I get all the proper info from...
  17. C

    Windows 7 Nic or not

    With windows 7 X 64 Ultimate and IE 9 is it better to use a nic card or the on board stuff for the internet connection?:confused:
  18. DrY

    Windows 7 Network Cable Unplugged

    I'm sure a million others have asked about this, but here goes: I've had to replace my router. My old router had gigabit LAN ports, and so does the new one. With this one, Windows reports "Network cable unplugged" when my NIC is set to Autonegotiate (Realtek GBEe gigabit LAN). If I change it...
  19. DrMario86

    Windows 7 New PCIe Adapter "Identifying" Woes

    Hey folks, I'm a system builder but not too well versed in networking yet. Story: New apartment, new ISP, new router, new adapter Hardware: Buffalo 300NH-V2, Asus PCIe N-15, Linksys USB54g OS: Win7 64-bit (Hasn't been formatted in 6yrs, IIRC) Symptoms: Stuck on "Identifying" with new NIC. Works...
  20. M

    Windows 7 Realtech RTL8139/810x Family Fast Ethernet NIC

    Dear All I have installed 2 Realtech RTL8139/810x Family Fast Ethernet NIC cards in my PC. But one of the cards shows that 'Unidentified Public Network'. How to solve the issue? Thanks in anticipation.
Back
Top