raid0

I posted once before about this issue with an older set of parts. I followed the suggestions in it and after removing norton, the problems went away. I'll post it here in case it helps. I got a new mobo/proc and now the Bsod demon is back. New System Specs are: Z97 Maximus VII Hero i7 4790k...

I had an all-in-one liquid cpu cooler leak coolant all over my PC last week, luckily it shut down from overheating when there was no coolant left in the loop. I disassembled my PC, cleaned everything with alcohol and let it dry. Then i bought an air cooler and installed it. After installing the...

Back Story: I had an issue in the past were my computer would restart overnight (I assume it crashed) and upon trying to start up the computer it would not load Windows 7(W7) most of the time. To get it to load I would have to shut the computer down and leave it off for a while and then it would...

Hello Forum. I already have Windows 7 (Pro64Bit) Installed on a 500GB Drive, I would like to Add a RAID0 Volume with 2 other 1TB Drives I have Gone into My Intel Raid Manager on my (ASUS P6T SE mobo) and selected to configure Sata as RAID and then added my 2 1TB drives as a RAID0 I Have also...

Hi, in my PC there are some drives with RAID0 arrays and from little time I have bought a SSD for Operative System (Windows 7). My question: in your opinion (on the BIOS) is it better making the Boot with SSD or with another drive with RAID0? Thanks for your suggestions

Hi! I am having trouble installing windows 7 (home premium) on my new raid array (2x intel 330 120GB SSD in RAID0) Basically, windows CAN see the raid volume. it recognies that there is a single 223 GB volume available. I select "Load Driver" for the volume, and plug in my trusty USB with...

Microsoft tech troubleshooter extraordinaire Gov Maharaj and I help walk you through troubleshooting solutions to your tech support problems. If you have a problem you want to send us, you can use the Problem Step Recorder in Windows 7 (Link Removed for details on how) and send us the zip file...

I have done a clean install with Win7 Ultimate onto my WD 150GB Velociraptor drives in a RAID0 configuration. I also have 2 500GB WD Caviar Black drives I am trying to set up in a RAID1. Only problem is when I convert them to RAID using the intel matrix console everything seems to go fine. I...

Hi I'm expriencing the exact same issue blue screen everytime, safe mode included, and I could go into safe mode ONCE and now just blue screens!! iastorv.sys seems to be the issue, I have the same blue screen than both of you my computer is a dell m6500 with raid0 ... I also tried system...

Specs: Windows 7 (x86) installed on a Raid0 array, Intel E8400 (stock), Asus P5K-E, 4x1GB OCZ ram (@800MHz, 2.1V), Ati HD5770 graphics card, Sonata case (550 W p/s) Occasionally when gaming, my PC crashes. 60% of the time, the display gets distorted for a fraction of a second, then the monitor...

So, got a new OCZ Vertex 2 120 GB over the weekend. Installed it, everything went fine. Blew away my old install (backed things up of course), loaded raid drivers during install. Formatted both, installed on SSD with my D drive as Games/Music/Etc. Now everything seemed fine on first boot...

Getting many different STOP errors, and some other issues. Here we go: I run a custom built computer, housed inside of a RAVEN 2 case; EVGA p55 LE motherboard, windows i5 (2.66 when not OC) processor, 8g ddr3 Corsair RAM, 2 10000 RPM Raptor Drives in RAID0, a third 600 gig drive, with...

Hello everyone, First of all I'm not 100% sure this is ONLY(or at all?) Win7 related but since a lot of my questions involve changing or moving my OS i figured i should start here) The problem I am having consists of my RAID volume( that I use for OS + data) has recently come back with an Error...

I'm currently running the Windows 7 RC, and I've bought a copy of Home Premium. Tomorrow some more hardware arrives, so it's a good time to reinstall Windows 7 to the proper version. I've backed all my data up, and I have drivers and installation packages for software stored. The next step is...

I set up a couple of 1tb WD HD's in a raid0 config and partitioned it into 2 chunks. 100gb for windows and whatnot and the rest in another chunk. It sees the 100gb part but wont recognize the rest of it. I can see it on boot and it says its golden but win 7 only sees the smaller partition. I...

I am trying to create a RAID0 using a Areca-1200 RAID Controller Card, 2 (New) WD Raptors and Win 7. I am using the latest drivers from Areca for Win7 64 and they are WHQL certified. During the install everything is fine loading the drivers, until it starts to copy files and then it says "...

I have a few issues with sleep on my desktop machine that is running Windows 7 RTM. My machine consists of the following: [DFI JR X58-T3H6] [i7 920 D0] [12GB OCZ OCZ3B2000C9LV6GK] [Corsair CMPSU-750TX] [Windows 7 (64bit)] [EVGA 280 GTX][OCZ Vertex 30GB x 3 in RAID0] I'll start with the most...

1st off I can install Win7 x64 via SATA Mode,But when I try to install Win7 x64 via RAID0.When it Win7 restarts for the 1st time,I get either a BSOD or I get just a part of the screen(But still see cursor & I can move it).It shows only upper left of screen.So,I was wondering if there is a way to...

Hi, I have a RAID0 with 2 partitions on it and I wish I could install it on my first partition of this RAID0. I'm currently using Windows Vista with the same computer but installed on another disc and the RAID0 is working correctly. My error is the following : When I have to choose which HDD I...

Ok guys, I have a Sony VGC-RC210G HTPC, it shipped with 2x160GB drives in RAID0 config. Yesterday I got 2 more 160GB drives and I want to add them to my config but can I do this without losing all my current data in the original configuration? I have the Intel Matrix Storage Manager, and checked...