Windows 7 BSOD PFN_LIST_CORRUPT ntoskrnl.exe
- Thread starter alig
- Start date
Trouble
Noob Whisperer
- Joined
- Nov 30, 2009
- Location
- N.W. Indiana
Hello and welcome to the forum.
A single dump file, blaming memory corruption.
You need to update your motherboard's chipset driver.
nvm62x64.sys 10/17/2008 Nvidia Ethernet Networking Driver part of your nForce chipset driver from here Drivers - Download NVIDIA Drivers
and while you are at it update this as well
NuidFltr.sys 5/8/2009 Microsoft Mouse Driver from here Software Downloads | Microsoft Hardware
If Blue Screens persist;
First make sure your machine is configured properly to facilitate the collection of .dmp files.
Please read the first post in this sticky thread here How to ask for help with a BSOD problem
Do your best to accumulate the data required.
Run the SF Diagnostic tool (download and right click the executable and choose run as administrator)
Download and run CPUz. Use the Windows snipping tool to gather images from all tabs including all slots populated with memory under the SPD tab.
Likewise RAMMon. Export the html report, put everything into a desktop folder that you've created for this purpose, zip it up and attach it to your next post (right click it and choose send to, compressed (zipped) folder.
Additionally, if you haven’t already, please take some time and fill out your system specs in your forum profile area http://windows7forums.com/windows-7...you-filling-your-system-specs.html#post235529 .
Good luck
Randy
A single dump file, blaming memory corruption.
Code:
BugCheck 4E, {99, 878da, 2, 878d8}
[COLOR=#ff0000][U][B]Probably caused by : memory_corruption[/B][/U][/COLOR] ( nt!MiBadShareCount+4c )
PFN_LIST_CORRUPT (4e)
[COLOR=#ff0000][U][B]Typically caused by drivers passing bad memory descriptor lists[/B][/U][/COLOR] (ie: calling
MmUnlockPages twice with the same list, etc). If a kernel debugger is
available get the stack trace.
Arguments:
Arg1: 0000000000000099, A PTE or PFN is corrupt
Arg2: 00000000000878da, page frame number
Arg3: 0000000000000002, current page state
Arg4: 00000000000878d8, 0nvm62x64.sys 10/17/2008 Nvidia Ethernet Networking Driver part of your nForce chipset driver from here Drivers - Download NVIDIA Drivers
and while you are at it update this as well
NuidFltr.sys 5/8/2009 Microsoft Mouse Driver from here Software Downloads | Microsoft Hardware
If Blue Screens persist;
First make sure your machine is configured properly to facilitate the collection of .dmp files.
Then:
Please read the first post in this sticky thread here How to ask for help with a BSOD problem
Do your best to accumulate the data required.
Run the SF Diagnostic tool (download and right click the executable and choose run as administrator)
Download and run CPUz. Use the Windows snipping tool to gather images from all tabs including all slots populated with memory under the SPD tab.
Likewise RAMMon. Export the html report, put everything into a desktop folder that you've created for this purpose, zip it up and attach it to your next post (right click it and choose send to, compressed (zipped) folder.
Additionally, if you haven’t already, please take some time and fill out your system specs in your forum profile area http://windows7forums.com/windows-7...you-filling-your-system-specs.html#post235529 .
Good luck
Randy
Trouble
Noob Whisperer
- Joined
- Nov 30, 2009
- Location
- N.W. Indiana
OK out of the six memory dump files that you've attached, it would seem that most are indicating issues with memory in one form or another.
First recommendation is to monitor your temperatures. Use something like Core Temp or whatever you might prefer.
Second Download Memtest86+ from this location here. Burn the ISO to a CD and boot the computer from the CD from a cold boot after leaving it off for an hour or more.
Ideally let it run for at least 7 passes / 6-8 hours. If errors appear before that you can stop that particular test. Any time Memtest86+ reports errors, it can be either bad RAM or a bad Mobo slot. Perform the test RAM sticks individually as well as all possible combinations. When you find a good one then test it in all slots. Post back with the results.
See this Guide to using Memtest 86+
Third since there seems to be some pagefile involvement run the native Check Disk utility and see what it comes up with.
From an elevated command prompt type
chkdsk C: /R
hit enter
answer yes "Y" when prompted and reboot.
Let it run all five stages and take a look at the results. Event Viewer, Windows Logs, Application, right click "Find" chkdsk
If you are using any USB drives as ReadyBoost devices, discontinue that for the time being.
If still no joy you may have to resort to Driver Verifier to zero in on what might still be the offending driver, cause I'm not seeing anything jumping out at me now. So if you decide that you need to go the Driver Verifier route, post back and I'll dig up some links as it is not generally something you want to use unless you are certain you have the requisite skill set and know how to start it, how to configure it and how to stop it. Here is one I suggest you read carefully, completely and make sure you understand before proceeding Link Removed - Invalid URL
Regards
Randy
First recommendation is to monitor your temperatures. Use something like Core Temp or whatever you might prefer.
Second Download Memtest86+ from this location here. Burn the ISO to a CD and boot the computer from the CD from a cold boot after leaving it off for an hour or more.
Ideally let it run for at least 7 passes / 6-8 hours. If errors appear before that you can stop that particular test. Any time Memtest86+ reports errors, it can be either bad RAM or a bad Mobo slot. Perform the test RAM sticks individually as well as all possible combinations. When you find a good one then test it in all slots. Post back with the results.
See this Guide to using Memtest 86+
Third since there seems to be some pagefile involvement run the native Check Disk utility and see what it comes up with.
From an elevated command prompt type
chkdsk C: /R
hit enter
answer yes "Y" when prompted and reboot.
Let it run all five stages and take a look at the results. Event Viewer, Windows Logs, Application, right click "Find" chkdsk
If you are using any USB drives as ReadyBoost devices, discontinue that for the time being.
Code:
BugCheck 4E, {99, 15d708, 2, 15dd07}
[COLOR=#ff0000][U][B]Probably caused by : memory_corruption[/B][/U][/COLOR] ( nt!MiBadShareCount+4c )
PFN_LIST_CORRUPT (4e)
Typically caused by drivers passing bad memory descriptor lists (ie: calling
MmUnlockPages twice with the same list, etc). If a kernel debugger is
available get the stack trace.
Arguments:
Arg1: 0000000000000099, A PTE or PFN is corrupt
Arg2: 000000000015d708, page frame number
Arg3: 0000000000000002, current page state
Arg4: 000000000015dd07, 0 Code:
BugCheck 1A, {403, fffff68000011410, f4d00001648b9867, fffff6fc00b245c8}
Probably caused by : win32k.sys ( win32k!SURFACE::bDeleteSurface+3a2 )
[COLOR=#ff0000][U][B]MEMORY_MANAGEMENT (1a)[/B][/U][/COLOR]
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000000403, The subtype of the bugcheck.
Arg2: fffff68000011410
Arg3: f4d00001648b9867
Arg4: fffff6fc00b245c8 Code:
BugCheck 50, {fffffa8086b08380, 0, fffff8800115c37e, 5}
Could not read faulting driver name
Probably caused by : fltmgr.sys ( fltmgr!FltpAllocateIrpCtrl+4e )
[COLOR=#ff0000][U][B]PAGE_FAULT_IN_NONPAGED_AREA (50)[/B][/U][/COLOR]
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffa8086b08380, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8800115c37e, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000005, (reserved) Code:
BugCheck 4E, {99, 1a6a9e, 2, 1a589d}
[COLOR=#ff0000][U][B]Probably caused by : memory_corruption[/B][/U][/COLOR] ( nt!MiBadShareCount+4c )
PFN_LIST_CORRUPT (4e)
Typically caused by drivers passing bad memory descriptor lists (ie: calling
MmUnlockPages twice with the same list, etc). If a kernel debugger is
available get the stack trace.
Arguments:
Arg1: 0000000000000099, A PTE or PFN is corrupt
Arg2: 00000000001a6a9e, page frame number
Arg3: 0000000000000002, current page state
Arg4: 00000000001a589d, 0 Code:
BugCheck 1A, {403, fffff683ff7890d8, 45b00001a34e0025, fffff6fc00d1a700}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+3266c )
[COLOR=#ff0000][U][B]MEMORY_MANAGEMENT (1a)[/B][/U][/COLOR]
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000000403, The subtype of the bugcheck.
Arg2: fffff683ff7890d8
Arg3: 45b00001a34e0025
Arg4: fffff6fc00d1a700 Code:
BugCheck 4E, {99, 878da, 2, 878d8}
[COLOR=#ff0000][U][B]Probably caused by : memory_corruption[/B][/U][/COLOR] ( nt!MiBadShareCount+4c )
PFN_LIST_CORRUPT (4e)
Typically caused by drivers passing bad memory descriptor lists (ie: calling
MmUnlockPages twice with the same list, etc). If a kernel debugger is
available get the stack trace.
Arguments:
Arg1: 0000000000000099, A PTE or PFN is corrupt
Arg2: 00000000000878da, page frame number
Arg3: 0000000000000002, current page state
Arg4: 00000000000878d8, 0Regards
Randy
- Joined
- Oct 16, 2009
Just some comments after looking through your Event Log.
You seem to have many of these errors. I do not believe they are causing your Blue Screens, but you might see if you can get them to stop.
http://windows7forums.com/blue-scre...d-microsoft-windows-wmi-0x80041003-print.html
You also seem to have some errors associated with .Net 2....
Are you running a Parallel printer or USB to parallel device?
I see this one once, but since I do not not what Easy Tune is, I really cannot comment.
Found this, and saw some solutions from resetting the CMOS to changing the RAM timing.
Maybe something is hiding in here that you and Trouble can figure out.
Edit: Is your Windows Update working normally? You seem to have some updates, which I cannot find out what they are for, not being allowed to download.
You seem to have many of these errors. I do not believe they are causing your Blue Screens, but you might see if you can get them to stop.
http://windows7forums.com/blue-scre...d-microsoft-windows-wmi-0x80041003-print.html
You also seem to have some errors associated with .Net 2....
Are you running a Parallel printer or USB to parallel device?
I see this one once, but since I do not not what Easy Tune is, I really cannot comment.
Found this, and saw some solutions from resetting the CMOS to changing the RAM timing.
Maybe something is hiding in here that you and Trouble can figure out.
Edit: Is your Windows Update working normally? You seem to have some updates, which I cannot find out what they are for, not being allowed to download.
Last edited:
Similar threads
