Elbasunu

New Member
Joined
Jul 13, 2010
Messages
28
Hey folks, I've read a LOT of your forum over the last week or so, trying to pin point exactly WHY I'm getting so many different types of BSODs. I've tried many of the solutions you have posted, but I can't really decipher my own crash dumps, and nothing else seems to work.

I usually get bsod's in games, while watching video in a browser, and sometimes just AFTER a bsod, I get another bsod on start-up. But it's not reliable, sometimes it just reboots on it's own, no bsod.

I also recently re-installed windows into it's own partition on the hard drive.

SPecs:
MB: Asus M4a785TD-V EVO
CPU: AMD Phenom II x4 945
RAM: 4g (2x 2gb) Crucial DDR3 1066
Video Card: GeForce 9600GT
OS: Windows 7 Prof.

View attachment Dumps.zip

Steps tried so far:
Running one stick, then the other, in varying slots
Running memtest86+ (1 pass, no problems detected)
Running windows memory diagnostic (had some issues, but wouldn't really extrapolate :( )
Re-Installed Windows in a seperate partion
Updating all major drivers (BIOS, Vidcard, Direct X)

I'm usually pretty good at trouble shooting my own machine, but I'm at my wit's end.
 

Solution
This latest crash is a 0x3b. This is almost always due to a faulty driver in the system. I can't really pick out any further ones that look like it/they could be the cause, by eye. They all look alright now.

If anything, you can try to update your Logitech QuickCam drivers from Logitech's website for these:

Code:
lvrs64   lvrs64.sys   Wed Oct 07 04:27:59 2009
lvuvc64  lvuvc64.sys  Wed Oct 07 04:28:44 2009

If you still have crashes after doing this, we can look at enabling Driver Verifier to try to pinpoint the actual driver causing problems.
I'd suspect RAM at this point. I would test each individual module one at a time and with multiple passes using Memtest86+. If any show even one error, it is the problem then.

Before doing so, make sure there is absolutely no overclocking going on. If there is, then this is the reason.

One thing even before that to try would definitely be to uninstall AMD overdrive. AODDriver2.sys keeps on showing as an uloaded module for some reason. I'd like to see that off the system.
Even going to C:\Windows\System32\drivers to rename it to AODDriver2.BAK and rebooting will stop it from being loaded.
 

Last edited:
Still crashing. Most often due to System_Service_Exception. Here's some dumps, but at this point, I'm not sure what else is useful in there.

View attachment 7067

Hi Elbasunu,

Do you still have the same crashing issue? You can check your system for software or hardware compatibility using the Windows 7 Compatibility Center. Download the Upgrade Advisor (which scans your machine for compatibility issues), or find updated drivers that address compatibility issues. The site is at Link Removed.

Ahmad AA
Windows 7 Professional Outreach Team
 

Last edited by a moderator:
At this point I replaced the RAM, but was still getting errors, so I updated the BIOS again, let memtest run overnight and no errors so far.

I'm cautiously optimistic, but also a little peeved if the issue WASN'T my ram.

Anymore crashes and I'm getting a new mobo.
 

I hate to rez this thread, but I just wanted to update that even after replacing the ram, I was still having BSOD's. I checked my PSU which was lower than I thought, at 430w, so I purchased a new Antec 650w PSU. This didn't fix the issue either, but it was still a needed upgrade, IMO.

I'm RMA'ing for a board replacement with ASUS, and I I'll update from there.

What really troubles me is when my whole computer crashes during memtest86+. I'm going to see if I can re-produce this on a by test basis. Like, if a specific test causes the issue.

@w7pro: I would love it if this were a software issue, but I can't for the life of me peg it down. I've tried several fresh installs, and written my drive to zeroes. At this point, I'm pretty sure it's hardware.
 

If your rig crashes during memtest it is either ram or mobo slot so you probably need to test that too. I assume you did run memtest outside of windows correct?

Download a copy of Memtest86 and burn the ISO to a CD using Link Removed due to 404 Error or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot. Test the sticks individually, and if you find a good one, test it in all slots.


Ken J
 

Back
Top