niks4evaurs

New Member
Joined
Nov 13, 2009
Messages
4
Hi,
can anyone help me with this problem?

When i lick my help and support center, instead of going to the home it opens some page which reads...

__elbasuer__
__elbasuer__
Marking a Link Removed as active is an advanced task that should only be performed by advanced users. Marking a partition as active on a Link Removed means that the computer will use the loader (an operating system tool) on that partition to start the operating system.







when I type any help topic , for example 'Restore' it shows the following message:


0 results for restore


__elbasuer__
Suggestions


  • Check your spelling
  • Try a different phrase

Can anyone help me with this????? Plzzzz

niks
 

Solution
This actually shows a problem with a corrupted help file.
It is caused by bluetooth software. If you have bluetooth in your computer, we can remove an entry in the registry file to correct the issue.

  1. Click on Start, type regedit.exe in the Search field, and press Enter.
  2. Provide consent to User Account Control if prompted.
  3. In the left hand navigation pane, expand each registry key until you are at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Assistance\Client\1.0\Namespaces\OEM\en-US\Topics.
  4. Delete the "BCRM_Bluetooth_Help" string value (REG_SZ).
  5. Close the Registry Editor and re-launch Windows Help and Support.
If you don't have the string in Topics, it could be under Titles. Do a search for the entry.
It should...

kemical

Essential Member
Joined
Aug 28, 2007
Messages
36,176
Hi,
I'm pretty sure someone has posted this problem before but as to the solution I'm unsure... I'd try the usual though like anti spyware/virus scans, try running 'sfc scannow' typed into the command prompt (right click and run as admistrator) and finally system restore..
If you upgraded from xp, try doing a clean install..
 

RAK

Extraordinary Member
Joined
Jul 6, 2009
Messages
2,502
I think I may have supplied a rather evasive answer, or perhaps it was not appliceable to the poster..
But, a word of caution, I would advise any readers to google with care for this word (reuseable spelt backwards, of course). There are some agressive pages using the word to launch malware.
 

Sean1082

New Member
Joined
Nov 11, 2009
Messages
14
I figured someone would be. I almost missed it myself. Think you could check out my post about my issue? Maybe you know. Here is the link Link Removed
 

Last edited:

Saltgrass

Excellent Member
Microsoft Community Contributor
Joined
Oct 16, 2009
Messages
15,155
If you have Help and Support running and start Task Manager, do you show it working correctly in Applications?

Do you have knowledge of any old help files that might be on your system, perhaps from an older program?

If you highlight the application and right click and select go to processes, does it show HelpPane.exe?

I do not know if creating a dump file from the Process would help, since I do not know how to read it, but maybe someone else could.
 

RGB

New Member
Joined
Jun 9, 2010
Messages
4
Do you have an OEM "help assistant" superimposed on Windows help?

Try uninstalling it.

In my case Windows Help works again if I uninstall HP Support Assistant. I see this also worked for qupav in another thread on this forum.

The uninstall takes a lot out of the HKLM\SOFTWARE\Microsoft\Assistance\Client\1.0\Namespaces\OEM section of the registry (mentioned elsewhere for another solution involving a stray bluetooth entry).

HP needs to provide a Windows Help & Support Update for notebooks to fix this problem.
 

pcs3657

New Member
Joined
May 6, 2010
Messages
210
This actually shows a problem with a corrupted help file.
It is caused by bluetooth software. If you have bluetooth in your computer, we can remove an entry in the registry file to correct the issue.

  1. Click on Start, type regedit.exe in the Search field, and press Enter.
  2. Provide consent to User Account Control if prompted.
  3. In the left hand navigation pane, expand each registry key until you are at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Assistance\Client\1.0\Namespaces\OEM\en-US\Topics.
  4. Delete the "BCRM_Bluetooth_Help" string value (REG_SZ).
  5. Close the Registry Editor and re-launch Windows Help and Support.
If you don't have the string in Topics, it could be under Titles. Do a search for the entry.
It should now have Help and Support without the "elbauser" entry.
 

Solution

RGB

New Member
Joined
Jun 9, 2010
Messages
4
pcs3657, many people with the corrupt windows help file problem that gives the _elbauser_ symptom do not have any bluetooth entry in that part of the registry, and like the OP in this thread they have found no other solution. This is well documented elsewhere. My post was to provide a solution. I have since noticed one other independent post with the same solution - so it is worth a try for those still suffering the problem (and as a bonus it is easy to do via control panel).

reghakr, WinHlp32.exe is the add-in to provide support for legacy help file format (*.hlp) in Win7. To my knowledge it has nothing to do with the problem discussed in this thread.
 

JohnHa

New Member
Joined
Jan 30, 2018
Messages
1
RGB

Thank you - that worked for me.

1. I did not have the Bluetooth key any in the Registry

2. I went to the HP Support Assistant web site HP Support Assistant | HP® Official Site and downloaded HP Support Assistant (sp82049.exe)

3. I installed HP Support Assistant and Windows Help immediately worked.

My history is that I have a vanilla W7 install (not an HP OEM install) following a rebuild of my HP Pavilion. Last year I downloaded HP Support Assistant and installed it ... and then un-installed it. I think this is probably what caused the problem with Help.
 

Back
Top