Misio12320
New Member
- Joined
- Aug 8, 2021
- Messages
- 14
- Thread Author
-
- #1
Hello. I have a issue with my Windows 10 sounds, I have updated my Windows with the latest update, I guess it was KB4023057 after that update I lost sounds, my drivers are installed but the speakers does not show inside the sounds>playback. I have installed unistalled drivers and didn't work, I'm unable to unistall the update so there's no return.
System info: Lenovo G580 20150.
Logs I guess after clicking at the red speaker button near hour and WiFi button: Link Removed
Screenshots
System info: Lenovo G580 20150.
Logs I guess after clicking at the red speaker button near hour and WiFi button: Link Removed
Screenshots
Last edited by a moderator:
Solution
try to turn off driver signature verification and install driver from driver pack installer. by the way is there any rollback option in the device properties setting?
UsmanTemuri
New Member
- Joined
- Aug 4, 2021
- Messages
- 10
Try uninstall the current driver and install this
Realtek High Definition Audio Driver for Windows
Realtek High Definition Audio Driver for Windows
Misio12320
New Member
- Joined
- Aug 8, 2021
- Messages
- 14
- Thread Author
-
- #3
Last edited by a moderator:
Misio12320
New Member
- Joined
- Aug 8, 2021
- Messages
- 14
- Thread Author
-
- #6
so anyone???
- Joined
- Jul 4, 2015
- Messages
- 8,998
Run this in powershell
Get-Service | ? { $_.Name -like "*Audio*" } | Select Status,Name,StartType
If any of them are not running then run the following
Get-Service -Name *Audio*| Start-Service (needs to be run from an elevated[run as admin] powershell prompt)
Get-Service | ? { $_.Name -like "*Audio*" } | Select Status,Name,StartType
If any of them are not running then run the following
Get-Service -Name *Audio*| Start-Service (needs to be run from an elevated[run as admin] powershell prompt)
Misio12320
New Member
- Joined
- Aug 8, 2021
- Messages
- 14
- Thread Author
-
- #9
Status Name StartType
------ ---- ---------
Running AudioEndpointBuilder Automatic
Running Audiosrv Automatic
------ ---- ---------
Running AudioEndpointBuilder Automatic
Running Audiosrv Automatic
Misio12320
New Member
- Joined
- Aug 8, 2021
- Messages
- 14
- Thread Author
-
- #11
Yes I have checked and they are outdated. Looks like the Windows update KB4023057 broken the sound and we cant do anything I guess. I have called the support and they said to use windows tools or something like that to install new Windows 10 fresh. So issue resolved I guessDid you check the manufacturer page? If there is a newer driver make sure and update the driver.
Misio12320
New Member
- Joined
- Aug 8, 2021
- Messages
- 14
- Thread Author
-
- #12
someone have solution or what?
Misio12320
New Member
- Joined
- Aug 8, 2021
- Messages
- 14
- Thread Author
-
- #14
I can't remove it. I don't see it inside the unistallYou can validate it's caused by the update by removing it.
Misio12320
New Member
- Joined
- Aug 8, 2021
- Messages
- 14
- Thread Author
-
- #16
Any restore point, safe mode is an "!" inside triangle in the developer mgr. Also the speaker shows X again and does not show speakers in the settings neither.
Misio12320
New Member
- Joined
- Aug 8, 2021
- Messages
- 14
- Thread Author
-
- #18
yes, I have something in the settings in Windows 10 but I can't trust it if this will reset all of my files.try to turn off driver signature verification and install driver from driver pack installer. by the way is there any rollback option in the device properties setting?
Tried with the driver pack and its stuck at 43%.
Last edited by a moderator:
Misio12320
New Member
- Joined
- Aug 8, 2021
- Messages
- 14
- Thread Author
-
- #19
so anyone? I have installed fake audio and its only in drivers shown and in the speakers not.
Similar threads
- Replies
- 0
- Views
- 32
- Replies
- 0
- Views
- 36
- Replies
- 0
- Views
- 1K
- Replies
- 0
- Views
- 81
- Replies
- 0
- Views
- 142