Windows 10 printer settings (epson lq 2190)

sherinlal

New Member
Joined
Dec 30, 2015
Dears..
we using epson lq2190 printer
a printing form manualy created and printing in this..after a power off
(12hr) printing form not b seen in the printing prfernce or printer server properties
this issue is als in windows 7 ,8,8.1and windows 10 but its not in while xp using
 
Some questions to get closer:
- Is it a printer directly connected to the computer or it is it a network printer?
- Can you print from the settings page of this printer a test page?
- Is it still functioning on a different computer?
- Do you see any query marks in the device manager?
 
Some questions to get closer:
- Is it a printer directly connected to the computer or it is it a network printer?
- Can you print from the settings page of this printer a test page?
- Is it still functioning on a different computer?
- Do you see any query marks in the device manager


Its a network printer
its working in work group
we can print text page
it functionig differnt computer same problem repeating
no query marks
 
Its a network printer
its working in work group
we can print text page
it functionig differnt computer same problem repeating
no query marks
Looking through an on-line User Guide, I think you are using the 'EpsonNet 10/100 Base Tx Int. Print Server' option.
And you need to power off/on before you can print. With power off/on you reset your printer and re-establish your network connection.

Maybe the following. Usually a TCPIP address is obtained from the modem/router in your network and the TCPIP address of your printer may change in time. But your computers may not be aware of that change.
Try what happens when you assign a fixed TCPIP address to your printer.

Make sure that the printer is set to using only the network interface.

That's all what I can think of, hope it helps.

Henk
 
Back
Top Bottom