It gets to about 23% and freezes, the system reboots, it brings up the menu to go to safe mode or continue normal, if i select normal, its a reboot loop. Currently I'm trying to use 7077 to see if it makes a difference, i see some people had issues with using a dvi monitor on this current build, casuing the freezing.
Proc : c2d E6400 stock speed 2ghz
Ram: 1gb crucial ballastix (not overclocked) running at 800mhz (the board wont support the speeds the ram is supposed to run at, so it selects the fastest speed it will accept with is 800mhz)
motherboard: ecs gf7100pvt-m3 (its a piece of s*&^)
all parts are brand new, its been running xp fine, without any issue, i have prime 95ed it day/night no problems, temps are fine, as it is not overclocked
Ram speeds are set to auto, it could possibly be an nvidia problem?
" Correction"
7077 makes it to 100% and then puts me in the reboot loop, will try vista 64
Proc : c2d E6400 stock speed 2ghz
Ram: 1gb crucial ballastix (not overclocked) running at 800mhz (the board wont support the speeds the ram is supposed to run at, so it selects the fastest speed it will accept with is 800mhz)
motherboard: ecs gf7100pvt-m3 (its a piece of s*&^)
all parts are brand new, its been running xp fine, without any issue, i have prime 95ed it day/night no problems, temps are fine, as it is not overclocked
Ram speeds are set to auto, it could possibly be an nvidia problem?
" Correction"
7077 makes it to 100% and then puts me in the reboot loop, will try vista 64
Last edited: