dvi

Hello everyone, I just purchased a HP HPE 180t computer (specs below). I have reformatted and reinstalled the operating system three times now, twice using HP's stuff and once using a clean install from a Windows 7 professional CD. After about a week of using the computer sometimes 3 or 4 days...

Hi everyone, My problem is that during Windows 7 Ultimate installation (right after the first reboot) the screen goes black! The monitor does not loose the signal because I can still see the green solid LED on it. I have run into this issue four times with four different PCs with four...

i'm using HDMI-DVI cable .we know that DVI are not passing sound and HDMI does, so it create collision and the result of this is strong noise from my TV which be stopped only when i do "mute". there is another way to stop the noise?

Hello, I am using a dell studio 1555 in combo with a benq E2200HD 22" widescreen monitor. It has an ati 4570hd card in it. I am connected to the monitor using Hdmi > Dvi The problem is on many of the resolutions i am getting a black border around the edge. Now i understand this is because it...

Well as the title says my screen goes black while playing new games (NFS Shift, Borderlands, Obvlion, Fallout 3 and so on). I havent experienced it with NFS Most Wanted and Havent played much of NFS Pro street to really test it out. I tried swapping out the DVI cables, went back to VGA, lowered...

as the title mention, my viewsonic LCD is not working with my copy of window 7. i dont know why. i have tried with my old samsung CRT, both of the DVI (using DVI-VGA converter) and VGA outout is working perfectly, but i cant get my LCD working. when i boot from safe mode, the LCD working. here...

Hi. I am out of ideas on this one. Was pretty inmpressed with WIN7 until yesterday: Yesterday I wanted to try to conect my pc to recently bought TV. So I connected DVI output from my PC into HDMI input in TV. Everything was cool. I tried to connect sound (so it would be coming out of tv- line...

I have an HD Radeon 4670 with two DVI slots and one S-Video. i have a 22" monitor plugged into each of the DVI's and a 19" tv on the S-Video. I can get any combination of two screens to work but i absolutely cannot get all three to work at the same time. Is this setup actually possible?

analog - DVI driver issue I pulled my hair out (what I have left) trying to figure this out. I could not install windows 7 on my PC. I would end up with a black screen. I have an NVIDIA 8800GS vid card. The card has 2 DVI ports on it. I use a KVM switch on my computers that only supports...

Specifications: i7 950 X58 motherboard with four pci-express slots Three ATI 3650 Pci-Express video cards with a total of 6 DVI ports 6GB memory 500GB Hard Drive Windows 7 Home Premium 64 bit (purchased, not RC) 3 Viewsonic 22" monitors and one Dell 24 inch monitor all running DVI cables...

My issue has been resolved. Step by step here is what I did: 1) Open Ati Catalyst. 2) From the graphics drop down select Desktops & Display. 3) At the bottom where you see a small monitor icon, click the little triangle at the top right corner. Click on configure in this menu. 4) You should now...

Installed PNY Nvidia GE Force 210 card, used VGA interface to get Windows 7 loaded, installed latest drivers from Nvidia web site (same as Windows Update I think, plugged DVI interface in, tried to load, Windows loads up, get chime , but no monitor output, gives BIOS screen etc OK, just loses...

1920x1080 Rez won't fill screen; ATI 4800 card When I'm set at 'optimum display settings' (1920 x 1080) a ~1" black frame surrounds the display, and text looks funky suggesting the picture is being artificially scaled down for some reason. This doesn't happen when I lower my resolution to 1440...

I am running on a MSI K8N Diamond Plus Motherboard with an XFX Nvidia Gforce 7600 GT (256MB). It has dual DVI's. I was able to do dual monitors in XP, but in Windows 7 it will not work. It see's both monitors, but for some reason, it thinks my second port is a VGA port and I cannot change...

Hi guys, I've searched the forum and googled but there seems to be no direct fix to this problem. I'm running an upgraded Windows 7 ultimate from Vista 64 Ultimate (I know, I really can't afford to do a clean install) and I have a small problem, a very small but a tad annoying one. I am...

Hi, first post. Just got Windows 7 RTM and installed it. First thing I noticed was the resolution. It was messed up. Big deal, I thought I'll just change it. I go to change it and the resolution is locked out at 800x600. I updated both the drivers for my monitor (Hannstar HF299) and my video...

When I first installed Windows 7 Build 7100 had available screen resolution 1600 X 1200 on my Planar 2010M DVI with GEForce 6800 GS. Somewhere along the way max became 1024 X 768, not sure if broken by nvidia upgrade or Windows Update. The monitor is listed as the Generic digital non PNP...

There are a few issues at play here, so I'll spell it out in the simplest terms possible: I've been getting the dreaded 'No Signal' after I do the install for Windows 7. I was able to somehow complete this install blind (the monitor was off) and subsequently can now get into Safe Mode...

Hi! First I watched movies and used pc fine, but I guess it was next time I tried to watch some movies, things got pretty weird. I connected pc to projector via DVI to HDMI cable. My htpc windows user doesn't have aero, so desktop picture was excellent. As soon as I opened video file using any...

I have a LG 22" screen, an xbox 360 and a pc. What I would like to do is connect both to the DVI-D Slot on the back of the screen. I was wondering if I could use the 'Source' button to switch between displays if I got a DVI-D Splitter Cable. Can anyone help. And just so you know, my current...