unallocated

I am trying to add another SSD to my PC, but it shows up in Disk Manager as 'Unallocated' without a drive letter, and there is no option to initialize the disk available. Instead, Windows gives me the option to convert it to an MBR or a Dynamic disk, and if I chose either it is simply replaced...

Bookspace disk space I noticed that I have unallocated disk space on the system disk. Quite a lot, in relation to the size of the disc in question, and so I like to use it. Does Windows have any tool / option to add it to C drive? The disk space reserved for programs and applications would...

I want to provide a lot of space for a Linux Mint distribution to run on the windows pc, having first set up a dual boot system. I had a D: drive with 800MB of space not being used. I deleted the D: drive and that space became "Unallocated". Following the instructions, I should be able to click...

I installed a 120gb SSD drive into my computer. When I cloned it it made 2 partitions and left some space unallocated. I would like to combine these if possible. f: is the active partition. But the windows system is on c: See the picture of my disk management screen

backed up my files on a 250g HDD reinstalled win7 on 500g HDD During install, I ignored the 250 and partitioned the 500g HDD like I have done thousands of times before. Then choise one of the partitions on the 500G HDD to install wnin7. Install complete and win 7 is on the proper partition...

Hi I'm trying to start over on the creating a recovery capsule thing. I have turned the old one into unallocated space. I can add it to drive C:\ that's not a problem, but I'd like to add it too the D:\ partition and it does't give me the option to do that. Here's the image, check out disk...

Back Story: I had an issue in the past were my computer would restart overnight (I assume it crashed) and upon trying to start up the computer it would not load Windows 7(W7) most of the time. To get it to load I would have to shut the computer down and leave it off for a while and then it would...

I recently purchased an SSD to use as my boot disc, and a 1TB HDD to use for my primary storage device. I installed my SSD, and installed Windows to it, installed my HDD, and set my BIOS up to boot from the SSD, with the HDD as a secondary drive. In device management, the HDD is is Unallocated...

i have 250 GB hdd in my computer ,but due to wrong usage of partition software i lost my hdd partition. For recover this i format my hard drive but not successful to recover my hdd partition .Now this time in "my computer" only shows the 125 GB partition . I tried to recover from the...

My first post on the Forum! I recently installed a 90GB Kingston Technology SSD and then created a shadow copy of my previous hard drive (which was 62.4GB), meaning that currently I only have access to this amount of space on the new hard drive. Can anyone confirm (or direct me to) a step by...

Hey guys, figured I'd ask some experts if I can save this thing before I do a complete reinstall and lose everything. I was messing around with some software today trying to format an SD card to EXT4, and I ended up with a constant reboot loop and bsod. So I plugged the hard disk into another...

I created a new partition and formatted it into Fat32 so my PS3 could recognize it. Now I don't need it. I now have a 30 GB and a 100 MB partition, and I don't know how to get rid of them.

Ok, i had a complete system running windows 7 and i just did a new build. I took my sata hd's out of the first build and used them in the new build. I had a 320g and a 1tb. I installed the 320g by itself and installed w7. Now i plugged in my 1tb drive with all of my personal files that i had...

If any Mods read this - can you just delete the post - no longer require help on it - thanks. =================== My system is a self built one with 3 SATA drives - 2 x 250 1 x 500 Gb. Win 7 is on one of the 250's while I have XP + 6 other partitions on the 500 Gb disk. My problem arose...

I creatrd a partition using Spotmau Partition Genius for backup until I could get an external hard drive. When I click the partition in the program ti says "Unallocated". I can't do anything with the partition and it is not visible in Windows. I would like to know how to delete it and create a...

Hey basicaly im a noob when it comes to win 7 not had a need to use windows for a while but recently had the urge to game on my pc again I have a 250gb hard drive which i have windows 7 and ubuntu installed onto and a 1tb and a 1.5tb hard drive formated in ntfs(from when i ran mainly xp)...

Alright, I've searched these forums and a number of others and haven't found a solution to my exact problem. Basically what is happening to me is my C Drive where Windows 7 is installed is only saying I have 28gb's of harddrive space left (on a 100gb partition) yet when I've run treeview it...

Hi Guys, I had a test version of windows 7 installed on my Sata drive which had 3 partitions on it (c:40gb, d:40gb, e:220). This worked fine. I decided that i liked Windows 7 so i wanted to re-install it on a permanent basis so i went through the installation, formatted C: ONLY and installed...

OK, guys here is the deal, One hour ago I had a windows XP and 2 partitions. "C, and the one I had the windows on "D". When installing 7, it obviously decided to name the drive C. So now I got drive C and an unallocated 120gb drive, that requires formating in order to be used. What can i do...

Basically while I was running Windows 7 I wanted to clone my 149GB Hard Drive to a 500GB partition on my 1TB HardDrive, with Ubuntu taking up the other 500GB. I coulnd'nt clone using Windows tools because I always had an error of some sort. I then tried cloning using various Ubuntu tools on the...