Windows 10 BSOD help needed

[brkkab]

I was just updating my post about my pc and I got a bsod while I was doing the post. Could you check my minidump for me ? It was ATI related. I just updated my video card drivers Friday to Crimson 16.11.4 after running DDU in Safe Mode first.

 

[kemical]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {ffffe5ffeec0900c, 8, 0, fffff805b513120e}

*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+3120e )

Followup:     MachineOwner

PROCESS_NAME:  FahCore_a4.exe

Hi Keith,

it looks like the gpu driver crashed whilst using Folding@Home ( FahCore_a4.exe ).

See how you go with the latest driver but basically programs like folding@home and Seti are a little like stress testing apps. Your machine has to be rock solid especially if your overclocking.
If the bsod keeps occurring try reducing your overclock (if your overclocked that is ) and see if it helps.

ICCWDT.sys Wed Aug 18 09:27:45 2010: Intel(R) Watchdog Timer Driver please update:
To update this driver you need to install the latest version of ASUS AI Suite 3 V1.01.30 Install Program for Windows 7 32bit & 64bit / 8.1 64bit / 10 64bit.
Look in the Utilities section and it's almost halfway down the page:
ASUS UK

 

[nmsuk]

Time to reduce that overclock on the 480 a little.

 

[brkkab]

Thanks guys.

 

[nmsuk]

I should really try it on my oc'd system. Furmark runs for hours as do games and prime95 so I should be good to go.

 

[brkkab]

Reinstalled AI Suite 3 and lowered my TriXX settings to GPU Clock 1410, mV +60 and Memory Clock 2030. AI Suite 3's 5 way Optimization was run again. Only change it made this time, was it set my ram to 2933. That's down from the 3200 it previously left alone as XMP.
I also set External Digi+ Control's VRM Spread Spectrum to disabled, CPU Power Phase Control to extreme and CPU Power Duty Control Probe to extreme.

 

[kemical]

Reinstalled AI Suite 3 and lowered my TriXX settings to GPU Clock 1410, mV +60 and Memory Clock 2030. AI Suite 3's 5 way Optimization was run again. Only change it made this time, was it set my ram to 2933. That's down from the 3200 it previously left alone as XMP.
I also set External Digi+ Control's VRM Spread Spectrum to disabled, CPU Power Phase Control to extreme and CPU Power Duty Control Probe to extreme.

Sounds good.

If you get any further crashes please post the dump file.

 

[brkkab]

Will do kemical.