"Page Fault In Nonpaged Area" -- The error generally means a faulty, missing or incompatible device driver. (If his system is new he should save his warranty rights and forget about messing around with it.)
The system is 1 month old.
I tried switching the memory, the memory did not work in my blue triple channel slots but it did work in the black ones
CPU-Z Also says my mem is 6,2 ghz
CPU-Z shows 543 mhz ram? is this due hyperthreading? so it downclocks when not used intensly? or does this mean faulthy ram?
my graphics card drivers are up to date, so is my motherboard ( i just got it ) it might be in the realtek hd audio drivers ?
thanks for the img burn link very usefull program.
edit 1: flashed the bios, still no progress
edit 2: Graphics card is 72c? this is no good, can this cause bluescreens?
edit 3: got it down to 49,
edit 4: overclocked the system memory, NO more bluescreens so far? temps raised a bit but its all fine!
edit 5: scrap edit 4, it still happens, was just judging to quick, ran memtest again nothing, ran the windows memory test, no errors
edit 6: went fine for 2 hours, went to the store so i turned my pc on and off to test if it BSOD'ed, and yea NOT_LESS_OR_EQUAL coud not read the rest because i have a wide-screen and it does not align correctly in DOS
Have you, when testing RAM, just tested one stick at a time? This is the best way to test as testing them all together can give false readings. Also check on the voltage and speed of your RAM. Some DDR3 have been noted to run better if run at a slightly lower speed. You could perhaps check the RAMs website for a user forum ect..