FridgidDreams
New Member
This cpuz137 x64.sys still appears to be the issue or something related. Not only does it appear above but also in your driver stack and stack text. I've been doing some research on why this keeps appearing even though it's not installed and it may have something to do with the CPU.Code:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {55ffba0, f, 0, fffff801265aabb0} *** WARNING: Unable to verify timestamp for cpuz137_x64.sys *** ERROR: Module load completed but symbols could not be loaded for cpuz137_x64.sys Probably caused by : cpuz137_x64.sys ( cpuz137_x64+2073 ) Followup: MachineOwner
Try stress testing the CPU with Prime95. You only need to run it for an hour or so but just check all is ok on that end.
http://www.mersenne.org/download/
Check your GPU using this app:
http://mikelab.kiev.ua/index_en.php?page=PROGRAMS/vmt_en
and this app too:
http://www.ozone3d.net/benchmarks/fur/
Well I ran Prime95 for around an hour and a half, I could do better testing at a later time like when I'm asleep or something but the log is down below. it pretty much came up with zero errors.
The first GPU test with VMT didn't bring up any errors as well other than 2 saying that my card wasn't supported for 2 options and when it tried to change my resolution. Log is down below as well
Now for the second GPU test the one with FurMark, I ran it for a bit and never had any issues but I don't know where it keeps it's logs. I had logging enabled but without knowing where it stores them I can't upload it.